RC (Rosette)

RC Strain gauge rosettes with 3 measuring grids and with leads

RC (Rosette)

expand_more

chevron_left

chevron_right

The C Series strain gauges are the ideal choice for structural tests at exceptional temperature conditions. They have an enormous temperature range and measure precisely even at very low temperatures down to -269 ° C. For a good mechanical flexibility, as well as flexibility and optimum adaptation to the material to be measured, the measuring grid of the C Series consists of a chrome-nickel special alloy on a polyimide foil.

Strain gauges of the C Series have an extremely wide temperature range at a very good price-performance ratio. The strain gauges of the C Series are available with three different geometries and are used, for example, in research and development, in the automotive industry, as well as in power plants and superconductors.

Temperature range: -269 to +250 ° C
Resistance: 120 and 350 Ohm
Measuring grid lengths: 1.5 to 10 mm
Strain gauges available in 120 and 350 Ohms
Measuring grid consists of chrome-nickel special alloy, measuring grid carrier is polymide
Fast delivery for preferred strain gauge types - available from stock!

Filter

Temperature response keyboard_arrow_down
Measuring grid length keyboard_arrow_down
Measuring grid length keyboard_arrow_down
Carrier length keyboard_arrow_down
Carrier length keyboard_arrow_down
Carrier width keyboard_arrow_down
Carrier width keyboard_arrow_down

Code	Measuring grid length	Measuring grid length	Measuring grid width	Measuring grid width	Carrier length	Carrier length	Carrier width	Carrier width	Temperature response
1-RC11-4/350	4 mm	0.157 in	1.1 mm	0.043 in	8 mm	0.315 in	8 mm	0.315 in	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F)
1-RC11-6/350	6 mm	0.236 in	1.3 mm	0.051 in	11 mm	0.433 in	11 mm	0.433 in	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F)
1-RC13-4/350	4 mm	0.157 in	1.1 mm	0.043 in	8 mm	0.315 in	8 mm	0.315 in	Aluminium (23 ppm/K; 12.8 ppm/°F)
1-RC13-6/350	6 mm	0.236 in	1.3 mm	0.051 in	11 mm	0.433 in	11 mm	0.433 in	Aluminium (23 ppm/K; 12.8 ppm/°F)

DMS C Serie - Datasheet

Data Sheets

English

Certificates and Approvals

Strain Gauges and Accessories - Statement of Compliance

Declaration of Conformity

English

RC (Rosette)
Type/technology	Foil strain gauge
Application	Stress Analysis / structural testing
Geometry	Y rosette
Measuring grid length	6 mm, 4 mm
Measuring grid length	0.236 in, 0.157 in
Measuring grid width	1.3 mm, 1.1 mm
Measuring grid width	0.051 in, 0.043 in
Carrier length	11 mm, 8 mm
Carrier length	0.433 in, 0.315 in
Carrier width	11 mm, 8 mm
Carrier width	0.433 in, 0.315 in
Temperature range	Cryogenic
Nominal resistance	350 Ohms
Gauge factor (measuring grid material)	Cr-Ni alloy (ca. 2.2)
Temperature response	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F), Aluminium (23 ppm/K; 12.8 ppm/°F)
Maximum elongation	Standard
Fatigue life	Standard
Connection configuration	Leads
Mounting	Bondable
Grid protection	Covered

List of accessories available for all variants of this family

Product Code	Description
1-CA80	Cyanoacrylate adhesive (CA80) - 10 mL
1-EP310N	Hot curing 2-comp. adhesive EP310N
1-X280	2-comp. adhesive X280-6 x 10 g
1-NG120	Nitrile rubber NG120
1-SG250	Silicone covering SG250
1-RMS1	Cleaning kit RMS1
K-KAB-ML	Measurement cable by the meter