MAIN MENU
Displacement transducer WA/100mm, plunger

WA-L+

Conf. Displacem. Trans. K-WA-L+, plunger

Configurable displacement transducer
Loose plunger design
Inductive measurement system
Selectable output signal:
80 mV/V (passive)
0-10 V, 4-20 mA or IO-Link

img

Conf. Displacem. Trans. K-WA-L+, plunger

expand_more
chevron_left
chevron_right

K-WA-L+: Inductive Displacement Measurement Device with Compact, Plunger-type Design - ready to be configured in accordance with your needs

Find bellow some explanations to our options.

Measuring range

The K-WA-L+ is available in eight different measuring ranges: 0...2 mm (002W), 0...10 mm (010W), 0...20 mm (020W), 0...50 mm (050W), 0...100 mm (100W), 0...200 mm (200W), 0...300 mm (300W) and 0...500 mm (500W).

Cable length

The standard version is supplied with a 3-meter cable (03M0). Additionally, the displacement transducer is available with the following cable lengths: 1 m (01M0), 6 m (06M0), 10 m (10M0) and 12 m (12M0).

Transducer identification

You can order the sensor with a TEDS (Transducer Electronic Data Sheet) chip for transducer identification. TEDS allows you to store the transducer data (characteristic values) in a chip that can be read by a connected measuring device (with an appropriate amplifier). HBK records the TEDS data at the time of delivery, so no amplifier parameterization is necessary.

NOTE: TEDS chips are not available for sensors with amplifier modules or variants without a connector. Standard delivery does not include a TEDS chip.

  • T = With TEDS
  • S = Without TEDS

Electrical connection to sensor

  • 31K = Pressure-resistant, permanently connected cable, thread M20x1.5
  • 32K = Permanently connected cable, 90°
  • 33K = Permanently connected cable, 0°
  • 31S = Pressure-resistant plug connection (LEMO), thread M20x1.5
  • 32S = Plug connection (LEMO), 90°
  • 33S = Plug connection (LEMO), 0°

The standard version (32K) has a permanently connected cable, that exits the sensor at 90°.

Electrical connection to end of cable

We can mount a plug or a amplifier module on the end of the cable upon request.

  • Y = Free ends, no amplifier
  • F = 15-pin D-sub-HD connector, for connecting to MGC+, Scout, MP85, and other HBK amplifiers
  • Q = 15-pin HD-sub-HD connector, for connecting to many HBK signal conditioners in the Quantum series (MX410, MX440, MX840, MX430, MX238)
  • P = 14-pin ODU connector, degree of protection IP68, for connecting to all HBK amplifiers of the Somat XR series that are suitable for measuring full bridge circuits
  • VA1 = With inline amplifier 0 … 10 V
  • VA2 = With inline amplifier 4 … 20 mA
  • VAIO = With inline amplifier IO-Link (digital output)

Linearity deviation

Standard is 0.2%. We can deliver WA-L sensors with a restricted linearity deviation of 0.1% upon request. With Inline amplifier you will always get 0.1 % linearity deviation ("A")

  • 2 = Linearity deviation 0.2%
  • 1 = Linearity deviation 0.1% (high accuracy)
  • A = Linearity deviation 0.1% with VA1, VA2, VAIO

Operating temperature range

In the standard version, you can use the sensor in an operating temperature range of -25°C to +80°C.

  • ST = -25 °C – +80°C
  • HT =  -30 °C – +150 °C
  • LT = -40 °C – +80 °C

Firmware version

If you order a WA-L+ with the VAIO option, you will get the latest firmware version, unless you choose an older version that is still available.

  • N = No firmware
  • IW01 = Firmware version 2.0.2
Language keyboard_arrow_down
WA-L - Quick Start Guide Quick Start Guide English, Italian, French, Chinese, German
WA-L - Data Sheet Data Sheets English
WA-L - Mounting Instructions Mounting Instructions English, Italian, French, Chinese, German
WA-L - Datenblatt Data Sheets German
WA-L - 數據表 Data Sheets Chinese
WA-L - Prospetto dati Data Sheets Italian

Certificates and Approvals

WA - EU Declaration of Conformity Declaration of Conformity English
WA - UKCA Declaration of conformity Declaration of Conformity English
Key Attributes: Displacement Transducers
Type/technology Inductive
Application Multi purpose
Measurement range 2 mm, 10 mm, 20 mm, 50 mm, 100 mm, 200 mm, 300 mm, 500 mm
Measurement range 0.079 in, 0.394 in, 0.787 in, 1.97 in, 3.94 in, 7.9 in, 11.8 in, 19.7 in
Degree of protection IP67
Output signal Passive, Voltage (0…10V), Current (4-20mA), IO-Link
Mechanical connection Loose plunger
Linearity deviation 0.1 %, 0.2 %
Shaft diameter 12 mm
Shaft diameter 0.5 in
Length 124 mm, 154 mm, 214 mm, 330.6 mm, 530.6 mm, 730.6 mm, 1130.6 mm
Length 4.9 in, 6.1 in, 8.4 in, 13 in, 20.9 in, 28.8 in, 44.5 in