预接线

预接线应变片：快速、安全、方便使用

将焊接工作留给 HBK，并通过订购预接线应变片来避免潜在的误差源。HBK 为小订单提供了“快速通道”服务，这有助于在10天内为您提供所需长度的电缆。

HBK 应变片符合当前 RoHS 要求，并且使用了新材料，使多股接线更灵活，更易于使用。TPE 绝缘电缆允许在-40 °C和120°C之间的温度范围内使用。

Code	几何	测量栅丝长度	测量栅丝长度	测量栅丝宽度	测量栅丝宽度	载板长度	载板长度	载板宽度	载板宽度	温度范围	额度阻值	温度响应	连接配置
1-LY41-1.5/120V1	单直片	1.5 mm	0.059 in	1.2 mm	0.047 in	7 mm	0.276 in	5 mm	0.197 in	标准（高达 200°C）	120 Ohm	低碳钢（10.8 ppm/K）	预接线（TPE 绝缘带状电缆）
1-LY41-3/350V3	单直片	3 mm	0.118 in	2.5 mm	0.098 in	10.9 mm	0.429 in	5.9 mm	0.232 in	标准（高达 200°C）	350 Ohms	低碳钢（10.8 ppm/K）	预接线（TPE 绝缘带状电缆）
1-LY41-6/120V1	单直片	6 mm	0.236 in	2.7 mm	0.106 in	13.9 mm	0.547 in	5.9 mm	0.232 in	标准（高达 200°C）	120 Ohm	低碳钢（10.8 ppm/K）	预接线（TPE 绝缘带状电缆）
1-LY41-6/350V1	单直片	6 mm	0.236 in	2.8 mm	0.11 in	13.9 mm	0.547 in	5.9 mm	0.232 in	标准（高达 200°C）	350 Ohms	低碳钢（10.8 ppm/K）	预接线（TPE 绝缘带状电缆）
1-LY41-6/350V3	单直片	6 mm	0.236 in	2.8 mm	0.11 in	13.9 mm	0.547 in	5.9 mm	0.232 in	标准（高达 200°C）	350 Ohms	低碳钢（10.8 ppm/K）	预接线（TPE 绝缘带状电缆）
1-LY41-10/350V1	单直片	10 mm	0.394 in	5 mm	0.197 in	18 mm	0.709 in	8 mm	0.315 in	标准（高达 200°C）	350 Ohms	低碳钢（10.8 ppm/K）	预接线（TPE 绝缘带状电缆）
1-LY91-1.5/350V3	单直片	1.5 mm	0.059 in	2 mm	0.079 in	6.6 mm	0.26 in	4.7 mm	0.185 in	标准（高达 200°C）	350 Ohms	低碳钢（10.8 ppm/K）	预接线（TPE 绝缘带状电缆）
1-RY81-3/350V1	Y应变花	3 mm	0.118 in	1.2 mm	0.047 in	9.7 mm	0.382 in	14.6 mm	0.575 in	标准（高达 200°C）	350 Ohms	低碳钢（10.8 ppm/K）	预接线（TPE 绝缘带状电缆）
1-RY81-6/350V1	Y应变花	6 mm	0.236 in	2.8 mm	0.11 in	13.1 mm	0.516 in	22.9 mm	0.902 in	标准（高达 200°C）	350 Ohms	低碳钢（10.8 ppm/K）	预接线（TPE 绝缘带状电缆）
1-TY11-6/350V1	T型应变花	6 mm	0.236 in	6.5 mm	0.256 in	12 mm	0.472 in	18 mm	0.709 in	标准（高达 200°C）	350 Ohms	低碳钢（10.8 ppm/K）	预接线（TPE 绝缘带状电缆）
1-XY41-6/350H3	剪切/扭转半桥片	6 mm	0.236 in	6 mm	0.236 in	16 mm	0.63 in	12.2 mm	0.48 in	标准（高达 200°C）	350 Ohms	低碳钢（10.8 ppm/K）	预接线（TPE 绝缘带状电缆）
K-CDY4	双直片	1.5 mm, 3 mm, 6 mm	0.059 in, 0.118 in, 0.236 in	1.8 mm, 2.7 mm, 3.2 mm	0.071 in, 0.106 in, 0.126 in	5.5 mm, 8.2 mm, 10.7 mm	0.216 in, 0.323 in, 0.421 in	6 mm, 8 mm, 9 mm	0.236 in, 0.315 in, 0.354 in	温度范围有限	350 Ohms	低碳钢（10.8 ppm/K）, 铝（23 ppm/K）, 奥氏体钢（16 ppm/K）, 石英玻璃/复合材料（0.5 ppm/K）, 钛/灰口铸铁（9 ppm/K), 塑料（65 ppm/K）, 钼（5.4 ppm/K）	氟聚合物绝缘电线, 预接线（TPE 绝缘带状电缆）
K-CLY4	单直片	0.6 mm, 1.5 mm, 3 mm, 6 mm, 10 mm, 20 mm, 50 mm, 100 mm	0.024 in, 0.059 in, 0.118 in, 0.236 in, 0.394 in, 0.787 in, 1.969 in, 3.937 in	1.1 mm, 1.2 mm, 2.7 mm, 5 mm, 0.5 mm, 0.8 mm, 1 mm, 1.2 mm, 2.3 mm, 2.5 mm, 2.8 mm, 4.1 mm, 4.2 mm	0.043 in, 0.047 in, 0.106 in, 0.197 in, 0.02 in, 0.031 in, 0.039 in, 0.047 in, 0.09 in, 0.098 in, 0.11 in, 0.161 in, 0.165 in	6 mm, 7 mm, 8 mm, 13.9 mm, 18 mm, 31.8 mm, 63.6 mm, 114.8 mm, 165.6 mm, 9.2 mm, 10.9 mm	0.236 in, 0.275 in, 0.315 in, 0.547 in, 0.709 in, 1.252 in, 2.504 in, 4.52 in, 6.52 in, 0.362 in, 0.429 in	4 mm, 5 mm, 5.9 mm, 8 mm, 8.2 mm	0.157 in, 0.197 in, 0.232 in, 0.315 in, 0.323 in	温度范围有限	120 Ohm, 350 Ohms, 1000 Ohms	低碳钢（10.8 ppm/K）, 铝（23 ppm/K）, 奥氏体钢（16 ppm/K）, 石英玻璃/复合材料（0.5 ppm/K）, 钛/灰口铸铁（9 ppm/K), 塑料（65 ppm/K）, 钼（5.4 ppm/K）	氟聚合物绝缘电线, 预接线（TPE 绝缘带状电缆）
K-CLY9	单直片	1.5 mm, 3 mm, 6 mm	0.059 in, 0.118 in, 0.236 in	2 mm, 4 mm	0.079 in, 0.157 in	6.6 mm, 6.3 mm, 9.5 mm, 7 mm	0.26 in, 0.248 in, 0.374 in, 0.275 in	4.7 mm, 7 mm, 9.5 mm, 6.3 mm	0.185 in, 0.276 in, 0.374 in, 0.248 in	温度范围有限	120 Ohm, 350 Ohms	低碳钢（10.8 ppm/K）, 铝（23 ppm/K）, 奥氏体钢（16 ppm/K）, 石英玻璃/复合材料（0.5 ppm/K）, 钛/灰口铸铁（9 ppm/K), 塑料（65 ppm/K）, 钼（5.4 ppm/K）	氟聚合物绝缘电线, 预接线（TPE 绝缘带状电缆）
K-CRY8	Y应变花	0.6 mm, 1.5 mm, 3 mm, 6 mm	0.024 in, 0.059 in, 0.118 in, 0.236 in	1.1 mm, 1.2 mm, 3 mm, 1.6 mm, 2.8 mm	0.043 in, 0.047 in, 0.118 in, 0.063 in, 0.11 in	4.8 mm, 8.2 mm, 9.7 mm, 13 mm, 13.1 mm	0.189 in, 0.323 in, 0.382 in, 0.512 in, 0.515 in	8.7 mm, 14.6 mm, 22.9 mm	0.342 in, 0.575 in, 0.902 in	温度范围有限	120 Ohm, 350 Ohms	低碳钢（10.8 ppm/K）, 铝（23 ppm/K）, 奥氏体钢（16 ppm/K）, 石英玻璃/复合材料（0.5 ppm/K）, 钛/灰口铸铁（9 ppm/K), 塑料（65 ppm/K）, 钼（5.4 ppm/K）	氟聚合物绝缘电线, 预接线（TPE 绝缘带状电缆）
K-CXY3	T型应变花	0.6 mm, 1.5 mm, 3 mm, 6 mm	0.024 in, 0.059 in, 0.118 in, 0.236 in	1 mm, 1.6 mm, 3.2 mm, 6.3 mm, 1.7 mm, 3.3 mm, 6.5 mm	0.039 in, 0.063 in, 0.126 in, 0.248 in, 0.067 in, 0.13 in, 0.256 in	6 mm, 6.3 mm, 8 mm, 12 mm, 7.6 mm	0.236 in, 0.248 in, 0.315 in, 0.472 in, 0.299 in	7 mm, 8 mm, 10.5 mm, 17.5 mm, 7.7 mm, 10.9 mm, 18 mm	0.276 in, 0.315 in, 0.413 in, 0.689 in, 0.303 in, 0.429 in, 0.709 in	温度范围有限	120 Ohm, 350 Ohms	低碳钢（10.8 ppm/K）, 铝（23 ppm/K）, 奥氏体钢（16 ppm/K）, 石英玻璃/复合材料（0.5 ppm/K）, 钛/灰口铸铁（9 ppm/K), 塑料（65 ppm/K）, 钼（5.4 ppm/K）	氟聚合物绝缘电线, 预接线（TPE 绝缘带状电缆）
K-CXY4	T型应变花	3 mm, 6 mm	0.118 in, 0.236 in	3 mm, 6 mm, 5.2 mm, 6.1 mm	0.118 in, 0.236 in, 0.204 in, 0.24 in	11 mm, 16 mm	0.433 in, 0.63 in	8 mm, 12.2 mm	0.315 in, 0.48 in	温度范围有限	120 Ohm, 350 Ohms, 700 Ohms	低碳钢（10.8 ppm/K）, 铝（23 ppm/K）, 奥氏体钢（16 ppm/K）, 石英玻璃/复合材料（0.5 ppm/K）, 钛/灰口铸铁（9 ppm/K), 塑料（65 ppm/K）, 钼（5.4 ppm/K）	氟聚合物绝缘电线, 预接线（TPE 绝缘带状电缆）

Code

几何

测量栅丝长度

测量栅丝宽度

载板长度

载板宽度

温度范围

额度阻值

温度响应

连接配置

1-LY41-1.5/120V1

单直片

1.5 mm

0.059 in

1.2 mm

0.047 in

7 mm

0.276 in

5 mm

0.197 in

标准（高达 200°C）

120 Ohm

低碳钢（10.8 ppm/K）

预接线（TPE 绝缘带状电缆）

1-LY41-3/350V3

单直片

3 mm

0.118 in

2.5 mm

0.098 in

10.9 mm

0.429 in

5.9 mm

0.232 in

标准（高达 200°C）

350 Ohms

低碳钢（10.8 ppm/K）

预接线（TPE 绝缘带状电缆）

1-LY41-6/120V1

单直片

6 mm

0.236 in

2.7 mm

0.106 in

13.9 mm

0.547 in

5.9 mm

0.232 in

标准（高达 200°C）

120 Ohm

低碳钢（10.8 ppm/K）

预接线（TPE 绝缘带状电缆）

1-LY41-6/350V1

单直片

6 mm

0.236 in

2.8 mm

0.11 in

13.9 mm

0.547 in

5.9 mm

0.232 in

标准（高达 200°C）

350 Ohms

低碳钢（10.8 ppm/K）

预接线（TPE 绝缘带状电缆）

1-LY41-6/350V3

单直片

6 mm

0.236 in

2.8 mm

0.11 in

13.9 mm

0.547 in

5.9 mm

0.232 in

标准（高达 200°C）

350 Ohms

低碳钢（10.8 ppm/K）

预接线（TPE 绝缘带状电缆）

Prewired
Type/technology	Foil strain gauge
Application	Stress Analysis / structural testing
Geometry	Linear, Double linear, 3-grid rosette, T rosette, Shear/torsion
Measuring grid length	3 mm, 6 mm, 1.5 mm, 0.6 mm, 10 mm, 20 mm, 50 mm, 100 mm
Measuring grid length	0.118 in, 0.236 in, 0.059 in, 0.024 in, 0.394 in, 0.787 in, 1.969 in, 3.937 in
Measuring grid width	2.5 mm, 2.8 mm, 1.8 mm, 2.7 mm, 3.2 mm, 1.1 mm, 1.2 mm, 5 mm, 0.5 mm, 0.8 mm, 1 mm, 2.3 mm, 4.1 mm, 4.2 mm, 2 mm, 4 mm, 3 mm, 1.6 mm, 6.3 mm, 1.7 mm, 3.3 mm, 6.5 mm, 6 mm, 5.2 mm, 6.1 mm
Measuring grid width	0.098 in, 0.11 in, 0.071 in, 0.106 in, 0.126 in, 0.043 in, 0.047 in, 0.197 in, 0.02 in, 0.031 in, 0.039 in, 0.09 in, 0.161 in, 0.165 in, 0.079 in, 0.157 in, 0.118 in, 0.063 in, 0.248 in, 0.067 in, 0.13 in, 0.256 in, 0.236 in, 0.204 in, 0.24 in
Carrier length	10.9 mm, 13.9 mm, 5.5 mm, 8.2 mm, 10.7 mm, 6 mm, 7 mm, 8 mm, 18 mm, 31.8 mm, 63.6 mm, 114.8 mm, 165.6 mm, 9.2 mm, 6.6 mm, 6.3 mm, 9.5 mm, 4.8 mm, 9.7 mm, 13 mm, 13.1 mm, 12 mm, 7.6 mm, 11 mm, 16 mm
Carrier length	0.429 in, 0.547 in, 0.216 in, 0.323 in, 0.421 in, 0.236 in, 0.275 in, 0.315 in, 0.709 in, 1.252 in, 2.504 in, 4.52 in, 6.52 in, 0.362 in, 0.26 in, 0.248 in, 0.374 in, 0.189 in, 0.382 in, 0.512 in, 0.515 in, 0.472 in, 0.299 in, 0.433 in, 0.63 in, 0.276 in, 0.516 in
Carrier width	5.9 mm, 6 mm, 8 mm, 9 mm, 4 mm, 5 mm, 8.2 mm, 4.7 mm, 7 mm, 9.5 mm, 6.3 mm, 8.7 mm, 14.6 mm, 22.9 mm, 10.5 mm, 17.5 mm, 7.7 mm, 10.9 mm, 18 mm, 12.2 mm
Carrier width	0.232 in, 0.236 in, 0.315 in, 0.354 in, 0.157 in, 0.197 in, 0.323 in, 0.185 in, 0.276 in, 0.374 in, 0.248 in, 0.342 in, 0.575 in, 0.902 in, 0.413 in, 0.689 in, 0.303 in, 0.429 in, 0.709 in, 0.48 in
Temperature range	Standard (up to 200°C), Limited temperature range
Nominal resistance	350 Ohms, 120 Ohms, 1000 Ohms, 700 Ohms
Gauge factor (measuring grid material)	Constantan (ca 2.0)
Temperature response	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F), Aluminium (23 ppm/K; 12.8 ppm/°F), Austenitic steel (16 ppm/K; 8.9 ppm/°F), Silica / composite (0,5 ppm/K; 0.3 ppm/°F), Titanium / gray cast iron (9 ppm/K; 5.0 ppm/°F), Plastic (65 ppm/K; 36.1 ppm/°F), Molybdenum (5.4 ppm/K; 3.0 ppm/°F)
Maximum elongation	Standard
Fatigue life	Standard
Connection configuration	Pre-wired (TPE-insulated ribbon cable), Fluoropolymer-insulated connection wires
Mounting	Bondable
Grid protection	Covered

Prewired

Type/technology

Foil strain gauge

Application

Stress Analysis / structural testing

Geometry

Linear, Double linear, 3-grid rosette, T rosette, Shear/torsion

Measuring grid length

3 mm, 6 mm, 1.5 mm, 0.6 mm, 10 mm, 20 mm, 50 mm, 100 mm

Measuring grid length

0.118 in, 0.236 in, 0.059 in, 0.024 in, 0.394 in, 0.787 in, 1.969 in, 3.937 in

Measuring grid width

2.5 mm, 2.8 mm, 1.8 mm, 2.7 mm, 3.2 mm, 1.1 mm, 1.2 mm, 5 mm, 0.5 mm, 0.8 mm, 1 mm, 2.3 mm, 4.1 mm, 4.2 mm, 2 mm, 4 mm, 3 mm, 1.6 mm, 6.3 mm, 1.7 mm, 3.3 mm, 6.5 mm, 6 mm, 5.2 mm, 6.1 mm

Measuring grid width

0.098 in, 0.11 in, 0.071 in, 0.106 in, 0.126 in, 0.043 in, 0.047 in, 0.197 in, 0.02 in, 0.031 in, 0.039 in, 0.09 in, 0.161 in, 0.165 in, 0.079 in, 0.157 in, 0.118 in, 0.063 in, 0.248 in, 0.067 in, 0.13 in, 0.256 in, 0.236 in, 0.204 in, 0.24 in

Carrier length

10.9 mm, 13.9 mm, 5.5 mm, 8.2 mm, 10.7 mm, 6 mm, 7 mm, 8 mm, 18 mm, 31.8 mm, 63.6 mm, 114.8 mm, 165.6 mm, 9.2 mm, 6.6 mm, 6.3 mm, 9.5 mm, 4.8 mm, 9.7 mm, 13 mm, 13.1 mm, 12 mm, 7.6 mm, 11 mm, 16 mm

Carrier length

0.429 in, 0.547 in, 0.216 in, 0.323 in, 0.421 in, 0.236 in, 0.275 in, 0.315 in, 0.709 in, 1.252 in, 2.504 in, 4.52 in, 6.52 in, 0.362 in, 0.26 in, 0.248 in, 0.374 in, 0.189 in, 0.382 in, 0.512 in, 0.515 in, 0.472 in, 0.299 in, 0.433 in, 0.63 in, 0.276 in, 0.516 in

Carrier width

5.9 mm, 6 mm, 8 mm, 9 mm, 4 mm, 5 mm, 8.2 mm, 4.7 mm, 7 mm, 9.5 mm, 6.3 mm, 8.7 mm, 14.6 mm, 22.9 mm, 10.5 mm, 17.5 mm, 7.7 mm, 10.9 mm, 18 mm, 12.2 mm

Carrier width

0.232 in, 0.236 in, 0.315 in, 0.354 in, 0.157 in, 0.197 in, 0.323 in, 0.185 in, 0.276 in, 0.374 in, 0.248 in, 0.342 in, 0.575 in, 0.902 in, 0.413 in, 0.689 in, 0.303 in, 0.429 in, 0.709 in, 0.48 in

Temperature range

Standard (up to 200°C), Limited temperature range

Nominal resistance

350 Ohms, 120 Ohms, 1000 Ohms, 700 Ohms

Gauge factor (measuring grid material)

Constantan (ca 2.0)

Temperature response

Ferritic steel (10.8 ppm/K; 6.0 ppm/°F), Aluminium (23 ppm/K; 12.8 ppm/°F), Austenitic steel (16 ppm/K; 8.9 ppm/°F), Silica / composite (0,5 ppm/K; 0.3 ppm/°F), Titanium / gray cast iron (9 ppm/K; 5.0 ppm/°F), Plastic (65 ppm/K; 36.1 ppm/°F), Molybdenum (5.4 ppm/K; 3.0 ppm/°F)

Maximum elongation

Standard

Fatigue life

Standard

Connection configuration

Pre-wired (TPE-insulated ribbon cable), Fluoropolymer-insulated connection wires

Mounting

Bondable

Grid protection

Covered

Product Code	Description
1-CA80	Cyanoacrylate adhesive (CA80) - 10 mL
1-X60	冷固化双组分胶粘剂 X60/100g+2x40ml
1-X60/A	快干胶 X60/组分 A - 100 g
1-X60/A-NP	快干胶 X60/组分. A - 400 g
1-X60/B	X60 - 单组分 B (液体)
1-X60/B-NP	快干胶 X60/组分B - 2 x 200 ml
1-ABM75	带铝箔应变片保护层 ABM75
1-BR120	丁基橡胶覆盖层 BR120
1-RMS1-300	RMS1 溶剂混合物 300 ml
K-KAB-ML	测量电缆

Product Code

Description

1-CA80

Cyanoacrylate adhesive (CA80) - 10 mL

1-X60

冷固化双组分胶粘剂 X60/100g+2x40ml

1-X60/A

快干胶 X60/组分 A - 100 g

1-X60/A-NP

快干胶 X60/组分. A - 400 g

1-X60/B

X60 - 单组分 B (液体)

1-X60/B-NP

快干胶 X60/组分B - 2 x 200 ml

1-ABM75

带铝箔应变片保护层 ABM75

1-BR120

丁基橡胶覆盖层 BR120

1-RMS1-300

RMS1 溶剂混合物 300 ml

K-KAB-ML

测量电缆

Pre-wired strain gauges are available for the following materials:

Material	x (ordering number)
Ferritic steel (11.8 ppm/K)	1
Aluminum (23 ppm/K)	3
Austenitic steel (16 ppm/K)	5
Silica/composite (0.5 ppm/K)	6

Simplified Documentation and Parameterization

To optimize the measuring point documentation each strain gauge includes two stickers which can be placed next to the measuring point and near the measuring amplifier. Benefit from the parameter information directly in the measurement setup:

QR code that directly links to the data sheet of the respective strain gauge
The product and production batch numbers
The k-factor and a additional space for your notes
QR code containing the values of the individual strain gauge to simplify computer-aided parameterization or documentation with a scanner

Please note: newly produced strain gauges all come with the sticker in stock, strain gauges still in stock do not have this feature yet.

Video: Learn how to bond a pre-wired strain gauge

Recommended for you

称重传感器

HBK 称重传感器技术是精确、安全、可靠和高质量的代名词。代表着创新能力以及灵活且经济高效的解决方案，几乎可以满足所有称重应用要求。同时，我们也致力于在相关行业的推广和发展。

几十年来，我们的称重传感器一直是行业标准。无论是模拟称重还是数字称重传感器、单点称重传感器还是弯曲梁称重传感器 — 都是您的理想之选！此外，我们还可为您的应用提供合适的称量仪表，软件和称重模块。

Read More
应变

应变计是疲劳和材料测试中的关键设备。无论是在结构耐久性测试，结构健康监测，还是 OEM 传感器的生产中，HBK 光纤和电阻应变片都是您的理想选择。

Read More
Y系列

Y系列应变片坚固、灵活，有多种不同的几何形状和版本，适用于所有常见的测试和测量应用，使其成为应变测试的标准。它将康铜测量栅丝与聚酰亚胺基底系统相结合。了解我们的应变片基础知识！

Read More
Strain Measurement Basics

Read More

Y Series - 數據表	數據表	English
Y Series - 數據表	數據表	German

预接线

预接线应变片：快速、安全、方便使用

Filter

Pre-wired strain gauges are available for the following materials:

Simplified Documentation and Parameterization

Video: Learn how to bond a pre-wired strain gauge

Related Products

LY（直片）

XY（T型应变花）

XY1/2/4 (扭转/剪切片)

Recommended for you

称重传感器

应变

Y系列

Strain Measurement Basics

We haved moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com