TYPE 4533-B

GENERAL-PURPOSE CCLD ACCELEROMETER

Family 4533-B is a CCLD accelerometer family with TEDS based on our ThetaShear® design. The family has wide frequency range, low noise, and low sensitivity to environmental factors.

TYPE 4533-B

expand_more

chevron_left

chevron_right

The 4533-B family is a general-purpose CCLD accelerometer family with a low-noise preamplifier with built-in TEDS functionality.

The family feature a wide frequency range, and have variants with sensitivities from 1 mV/ms–2 (9.8 mV/g) to 50 mV/ms–2 (490 mV/g).

The lightweight, robust and hermetically sealed titanium housing makes the accelerometer suitable for use in tough environments. The insulated base avoids group loop problems, and the 10–32 UNF threaded
mounting hole ensures good mounting. All these features make the accelerometers suitable for use in a variety of environmental conditions.

USE SCENARIOS

General purpose vibration measurement
Measurements in variable environmental conditions

Features

Insulated base to avoid ground loops
Wide frequency range from 0.2 Hz to 12.8 kHz
Hermetically sealed to be used in tough environments
Low noise floor for low-level measurements
Low-impedance output to drive long cables
10–32 UNF threaded mounting hole for secure mounting

Filter

Sensibilidade keyboard_arrow_down
Faixa de medição keyboard_arrow_down
Faixa de medição keyboard_arrow_down

Code	Faixa de medição	Faixa de medição	Sensibilidade	Valor limite inferior
-4533-B-001-	710 m/s²	71 g	98 mV/g	0.2 Hz
-4533-B-002-	140 m/s²	14 g	490 mV/g	0.3 Hz
-4533-B-004-	1430 m/s²	143 g	49 mV/g	0.2 Hz
-4533-B--	7140 m/s²	714 g	9.8 mV/g	0.2 Hz

Product Data: CCLD Accelerometers with TEDS Type 4533-B, 4533-B-001, 4533-B-002, and 4533-B-004 and Type 4534-B, 4534-B-001, 4534-B-002, and 4534-B-004 (bp2464)

Data Sheets

English

FAMILY 4533-B
Type/technology	Piezoelectric CCLD (IEPE)
Direction/Axes	Uniaxial
Measurement range	710 m/s², 1430 m/s², 7140 m/s², 140 m/s²
Measurement range	71 g, 143 g, 714 g, 14 g
Application	General purpose
Weight	8.6 g
Weight	0.3 oz
Sensitivity tolerance	10 %
Sensitivity	98 mV/g, 49 mV/g, 9.8 mV/g, 490 mV/g
Lower frequency	0.2 Hz, 0.3 Hz
Higher frequency	12.8 kHz
Minimum Temperature	-55 °C
Maximum Temperature	125 °C
Minimum Temperature	-67 °F
Maximum Temperature	257 °F
Mounting	Clip mounting, Stud mounting, Center bolt mounting
Resonance frequency	38 kHz
Output signal (connectivity)	Analogue
Electrical connector location	Side
TEDS	Yes
Electric isolation	Case isolated

List of accessories available for all variants of this family

Product Code	Description
AO-0038-D-300-	Cable 10-32 UNF(M) to (M), 30m, sln
AO-0531-D-030-	Cable 10-32 UNF(M) to BNC(M), 3m, coax
JP-0145---	Adaptador BNC a 10-32 UNF.
UA-0186---	CONECTORES DE EXTENSÃO JJ 0032, CONJUNTO
DB-0544---	Mechanical part, test probe tip, round s
UA-0866---	Conjunto de 25 discos de montagem de ace
UA-2063---	Stud Set, 10x 10-32 UNF, L 7.9mm, Steel
UA-2064---	Stud Set, 10x 10-32 UNF w/Flange,L 5.3mm
QA-0029---	Thread Tap, 10-32 UNF, HHS ISO 529
YJ-0216---	Cera de abelha para fixação de aceleróme