MX1616B

QuantumX Bridge Amplifier (16)

16-channel Bridge Amplifier of the QuantumX family;
Supports the following transducer technologies:
- Strain gage conditioning in full, half or quarter
bridge configuration;
- Bridge excitation voltage: DC or carrier frequency
with 1200 Hz;
- Integrated 350 and 1000 Ohm quarter bridge completion
resistor;
- Internal shunt resistor (100 kOhm);
- Voltage: 10 V;
- RTD (PT100), resistor;
- Potentiometer;
The following applies for each channel:
- Data rate: max. 20 kS/s;
- Digital low pass filter: Bessel, Butterworth;
- TEDS support: automatic sensor identification;
- Socket: Phoenix Push-In (8 pin. / gold);
General connections:
- 1 x Ethernet with PTP support;
- 2 x FireWire;
- Voltage supply: 10...30 V DC, max. 12 W;
Notes:
- 16 x terminal plugs included;
- Accessories: package of 16 plugs (1-CON-S1015).

expand_more

chevron_left

chevron_right

Strain gauge amplifier – QuantumX MX1615B / MX1616B

The strain gauge amplifiers, QuantumX MX1615B and QuantumX MX1616B, are suitable for precise and safe data acquisition of strain gauges in full-bridge, half-bridge and quarter-bridge configuration, as well as for strain gauge based transducers, potentiometers, resistance thermometers (PT100) or normalized voltage (+/- 10V). This means that this data acquisition unit is an ideal choice whenever strains, forces and displacements are acquired and also temperature influences play a role, too.

The MX1615B and MX1616B modules are equipped with 16 sensor inputs, arranged in a very compact housing. As a result, the MX1615B and MX1616B offer an unrivaled channel density in a small space. Typical application areas include static stress tests for FEM models, quasi-dynamic fatigue tests for life analysis, monitoring tasks, material investigations, residual stress analysis, maintenance tasks (e.g. for mechanical testing of PCB circuit boards), as well as for general recording of the load data in the field.

Like all QuantumX data acquisition modules, the MX1615B / MX1616B modules offer instant sensor detection via TEDS ("Plug & Measure"), and can be combined and scaled freely with all other QuantumX modules.

Precise

Patented circuitry (4-, 5-, 6-conductor technology, carrier frequency technology, as well as cyclic auto-adjustment on all channels)
Robust mechanism, which prevents electromagnetic and thermal interferences in the measurement result (e.g. due to inverter, high currents, electrical machines or temperature influences)
Individually configurable measuring rates up to 20 kS/s per channel and with high signal bandwidth.
Working standard calibration certificate according to ISO 10012 stored in the module
DAkkS certificate (ISO 17025) from HBM on request

Accurate, interference-free measurement results - for dynamic as well as static measurements. Thanks to the carrier-frequency method, you can count on clear results even when very high interferences occur and long cables are used.

Time-saving and efficient

Plug & Measure - the automatic channel configuration for each sensor
Instant calibration of sensors or plausibility check by internal shunt connection
Fast instrumentation using push-in plugs
Distributed concept and short, prefabricated sensor cables

Realize time and efficiency gains in measurement and analysis: through intelligently combined measurement chains and plug & measure technology. Mechanical voltages can be immediately visualized, stored or digitally forwarded.

Easy to integrate

Suitable for a wide range of ambient temperatures (-20 ° C ... + 65 ° C) with a robust design
Instant results with the help of the HBM catman software for data recording and data analysis
Real-time integration on the Ethernet fieldbus (CX27C), CAN (MX471C), or voltage output (MX878B)
Open software concept (Visual Studio .NET, LabVIEW, etc.)

A strain gauge amplifier that fits into your system landscape. That's how easy it is!

QuantumX MX1616B - Data Sheet	Data Sheets	English
QuantumX MX1616B,QuantumX MX1615B - Data Sheets	Data Sheets	Japanese
QuantumX MX1616B,QuantumX MX1615... - Data Sheets	Data Sheets	German
QuantumX MX1616B,QuantumX MX1615...,QuantumX MX1615B - Data Sheets	Data Sheets	Chinese

Sales documents

QuantumX - Brochure	Brochure	English
QuantumX - Brochures	Brochure	German
QuantumX - Brochures	Brochure	Portuguese
QuantumX - Brochures	Brochure	Chinese
QuantumX - Brochure	Brochure	Japanese

Certificates and Approvals

QuantumX - EU Declaration of Conformity

Declaration of Conformity

English

MX1616B - CAD

CAD Step Files

Key attributes: DAQ Systems
Number of inputs	16
Input	Strain gauge full/half bridge, Strain gauge quarter bridge, Standardized voltage (+/- 10V), Resistance (PTC, NTC, KTY), RTD (Pt, Ni)
Output	None
Interface	TCP/IP, Firewire
Accuracy class	0.05, 0.1
Degree of protection	IP20
Sample rate	20000 Hz
Housing	Standalone
Real-time capabilities	None

Product Code	Description
1-TEDS-PAK	TEDS pack, 5x 1-wire EEPROM, DS24B33+
1-BPX001	QuantumX backplane wall mounting
1-BPX002	QuantumX backplane rack mounting
1-BPX003	QuantumX backplane (5)
1-CASECLIP	QuantumX mounting set
1-CASEFIT	QuantumX mounting plate
1-CON-S1015	Transducer plug (Phoenix push-in, 8pins)
1-KAB239-2	Cable Ethernet Cat6A, RJ45, 2 m
1-KAB271-3	DC power supply cable (ODU-3m-open)
1-KAB272-2	FireWire (ODU-2m-ODU)
1-KAB272-5	FireWire (ODU-5m-ODU)
1-KAB272-W-0.2	FireWire (ODU 90°-0.2m-ODU 90°)
1-NTX001	Adapter power supply, 24 V/DC
1-WIRING-MATE	Mounting aid for MX1615/16/01 Connectors