Pre-assembled strain and temperature sensor arrays on one cable for fast, efficient installation.
Matrizes de sensores (FS76)
This solution combines strain and temperature measurement in a single preassembled cable, reducing installation time and complexity. Sensors are permanently spliced for reliable performance. Configure cable protection, sensor type and quantity, wavelengths, lengths, and connectors to fit your application.
Preassembled strain and temperature sensors on a single cable minimize installation effort, significantly speeding up setup compared to separate sensor installations.
Permanent factory splicing guarantees robust connections and reliable performance, minimizing the number of butt-joint or spliced connections required on site.
Choose sensor type, quantity, wavelengths, cable length, and connectors for tailored solutions.
| Type/technology | Fiber Bragg Grating |
| Application | Optical stress measurement |
| Geometry | Linear |
| Measuring grid length | 5 mm |
| Measuring grid length | 0.2 in |
| Measuring grid width | 0.195 mm |
| Measuring grid width | 0.008 in |
| Carrier length | 83 mm, 130 mm, 138 mm, 240 mm, 40 mm |
| Carrier length | 3.3 in, 5.1 in, 5.4 in, 9.4 in, 1.6 in |
| Carrier width | 20 mm, 23 mm, 30 mm, 50 mm, 12 mm |
| Carrier width | 0.8 in, 0.9 in, 1.2 in, 2 in, 0.47 in |
| Temperature range | Limited temperature range |
| Nominal resistance | Other resistance |
| Gauge factor (measuring grid material) | FBG (ca. 0.79) |
| Temperature response | No matching of temperature response |
| Maximum elongation | Enhanced |
| Fatigue life | Enhanced |
| Connection configuration | Optical fiber (for optical fibers (FC/APC, SC/APC, splice) |
| Mounting | Bondable, Embeddable, Bolt able, Weldable |
| Grid protection | Other |
List of accessories available for all variants of this family
1-X60
1-X60/A
1-X60/A-NP
1-X60/B
1-X60/B-NP
1-ABM75
1-BR120
1-RMS1-300
1-RMS1-SPRAY
1-FS-SPLITTER
1-KLEBEBAND