arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

U15

经济高效的U15参考力传感器可用作传输标准和主传感器。测量范围:容量的10%到100%。

img

U15

expand_more
chevron_left
chevron_right

U15精密称重传感器:校准力从2.5 kN到2.5 MN

U15精密称重传感器(参考力传感器)可可靠地测量高达2.5 MN的拉伸和压缩力。它非常适合用作校准机中的主传感器、测试台中的挑战性任务以及传输标准(例如,在验证或校准材料试验机或进行传输测量以确保校准机可追溯到标准时 ) 。

由于传感器显示非常低的位移,测试台的几何结构在负载下也很稳定。U15精密称重传感器的高分辨率、出色的信号噪比和低测量不确定度基于传感器的高输出信号(从25千牛到大于4毫伏/伏)。这样可以优化后续电子产品的测量范围。 

U15符合ISO 376第0.5级的要求。其径向对称设计使传感器对温度梯度不敏感。U15精密称重传感器 由于具有高IP67防护等级和使用不锈钢材料,因此非常坚固。

Ul.
  • 精度等级(根据ISO 376:2011): 0.5,范围为标称载荷的10%和100% 
  • HBK 精度等级: 0.02 到 0.05
  • 容量: 2.5 kN 到 2.5 MN
  • 高精度类

    Ul.
  • 符合ISO 376对精度等级0.5的要求,范围在容量的10%到100%之间
  • 高输出信号,对于许多容量而言, > 4 mV/V
  • 信号调整为3 mV/V,可选
  • 优异的信号/li>
  • 通过电子弯矩补偿,在不同安装位置具有良好的重复性
  • 传递拉伸和压缩力标准,最大1 MN
  • 符合标准的精度,在不利的使用条件下也是如此。绝对的可靠性。

    单个配置

    Ul.
  • 可根据要求提供双桥版本:一个输出可用作参考信号,一个输出可用作机器控制的输入(也适用于高力和高负载的机器)。 
  • 面向应用的附件,如 TEDS、符合 ISO 376 标准的负载应用和指关节眼
  • HBK 使U15与放大器一起作为测量链进行校准(HBK 校准实验室的权限)
  • 选项:作为校准产品交付(通过HBK ISO 17025认可的校准实验室进行校准) 
  • 最佳完整解决方案 包括校准附件,用于可靠的传递测量

    小位移

    Ul.
  • 小位移
  • 结果:高刚度和优异的动态性能
  • 用于动态校准任务的高共振频率
  • IP67防护等级和气密密封带来出色的长期稳定性,坚固耐用
  • 小型TKZero 且对温度梯度的敏感度低
  • 测量精度,即使在动态或恶劣条件下。最小位移。 

    Language keyboard_arrow_down
    U15 - 數據表 Data Sheets English
    U15 - 安裝說明 Mounting Instructions English, Italian, French, Chinese, German

    Certificates and Approvals

    C15,U15,U10M/U10S,C10 - 符合性聲明 Declaration of Conformity English
    U15
    Maximum capacity (nominal load) 2.5 kN, 5 kN, 10 kN, 25 kN, 50 kN, 100 kN, 250 kN, 500 kN, 1 MN, 2.5 MN
    Maximum capacity (nominal load) 562 lbf, 1.12 klbf, 2.25 klbf, 5.62 klbf, 11.2 klbf, 22.5 klbf, 56.2 klbf, 112 klbf, 225 klbf, 562 klbf
    Tensile / compression Compression, Tension, Both directions
    Type / technology Strain Gauge
    Calibration Fulfills ISO 376
    Output signal mV/V (passive strain gauge)
    HBK Accuracy class 0.5 (ISO376)
    Degree of protection IP67
    Mechanical adaptation Central thread
    Height (without accessories) 114.5 mm, 174.5 mm, 217.3 mm, 307.3 mm, 465.3 mm
    Height (without accessories) 4.51 in, 6.87 in, 8.56 in, 12.1 in, 18.32 in
    Diameter (without cable or plug) 104.8 mm, 153.9 mm, 203.2 mm, 279 mm, 390 mm
    Diameter (without cable or plug) 8.27 in, 10.59 in, 14.49 in, 15.35 in

    Now available: U15 with improved technical data

    • Improved technical data for many key values (creep, TK0, hysteresis)
    • Extended measurement range: Meets the requirement of class 0.5 according to ISO376 from 10%
    • Now also available as a tension/compression reference transducer with maximum capacity of  up to 2.5 MN

    Extensive range of accessories

    • TEDS
    • Tensile force application per ISO 376
    • Thrust pieces per ISO 376
    • Knuckle eyes
    • Various connection cables in different, practical lengths and with plugs, soldered on for connection to the amplifier, on request.

    For more information please refer to the data sheet.

    A complete measuring chain: Perfect precision for a perfect price.

    The combination of the reference transducer U15 and the precision measuring amplifier module QuantumX MX238B results into an extremely cost-effective precision measuring chain. Thanks to the modular design of the QuantumX modules, you can also easily extend this measuring chain by a number of additional measuring variables, e.g. Temperature, voltage, angle of rotation.

    Related Products