KDB 专用力传感器用于验证建筑材料试验机。符合 EN 12390 标准。可用作传递标准,最高 3 MN。
KDB
KDB 专用力传感器的设计符合 DIN EN 12390 的要求。本标准描述了验证建筑材料试验机的程序。根据该标准,力传感器的供货范围包括两个用于加载的硬化底板。定心销便于组装。
四个独立的应变全桥片可以测量弯矩和总力。
在中心加载应用的情况下,力传感器量程可高达 3MN。HBK 为此应用提供了一个球形压头和一个止推片。这使得 KDB 能够用作符合ISO 376 0.5级要求的参考传感器。
符合标准且可靠的建筑材料试验机测试。此外,KDB 还可用作参考传感器(可提供所需附件)。
面向实际应用,凭借数十年的应用经验,我们提供匹配的配件。
| KD / STZ / KDB - 數據表 | Data Sheets | English |
| KD / STZ / KDB - 數據表 | Data Sheets | French |
| KD / STZ / KDB - 數據表 | Data Sheets | German |
| KD / STZ / KDB - 數據表 | Data Sheets | Italian |
| KDB - 數據表 | Data Sheets | Chinese |
| KD / STZ / KDB - 操作說明 | Manual | English, Italian, French, Chinese, German |
Certificates and Approvals
| KD / STZ / KDB - 符合性聲明 | Declaration of Conformity | English |
| Maximum capacity (nominal load) | 2 MN |
| Maximum capacity (nominal load) | 450 klbf |
| Tensile / compression | Compression |
| Strain gauge / piezo | Strain Gauge |
| Calibration | Fulfills ISO 376 |
| Output signal | mV/V (passive strain gauge) |
| HBK Accuracy class | 0.5 (ISO376) |
| Degree of protection | IP64 |
| Mechanical adaptation | Spherical load introduction |
| Height (without accessories) | 250 mm |
| Height (without accessories) | 9.84 in |
| Diameter (without cable or plug) | 140 mm |
| Diameter (without cable or plug) | 5.51 in |
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.