MX440-PAKAP

QuantumX Paket: MX440B + catmanAP

Produktpaket, bestehend aus:
4-Kanal Universalmessverstärker der QuantumX-Familie;
Unterstützung der folgenden Aufnehmertechnologien:
- DMS Halb- oder Vollbrücke (DC oder TF mit 4.8 kHz);
- Strom-gespeiste Piezos (IEPE);
- Piezo-resistive Vollbrücke;
- Widerstandsthermometer (PT100, PT1000);
- Thermoelemente (Typ K, N, R, S, T, B, E, J);
- Ohmscher Widerstand;
- Potentiometrische Abnehmer;
- Induktive Halb- oder Vollbrücke, LVDT;
- Spannung (±100 mV, ±10 und ±60 V);
- Strom (±20 mA);
- Pulszähler, Frequenz, Drehgeber (inkrementell
mit/ohne Index), SSI;
Für jeden Messkanal gilt:
- Messrate: max. 40 kS/s (7 kHz Bandbreite);
- galvanische Trennung untereinander;
- einstellbarer Tiefpass (Bessel, Butterworth);
- TEDS-Unterstützung: Automatische Sensorerkennung;
- Sensorversorgung: 5...24 V, 0.7 W (Modul: 2 W);
- Buchse: DSubHD 15pol.;
Allgemeines:
- 1 x Ethernet (PTP), 2 x Firewire;
- Spannungsversorgung: 10...30 V DC, max. 10 W;
- Werkskalibrierdaten nach DIN/ISO 10012 auf dem
Gerät gespeichert (Zertifikat generieren via MX
Assistent)
Produktpaket ist 15% rabattiert und beinhaltet zusätzlich:
- Netzteil (1-NTX001);
- 4 Aufnehmerstecker (1-SUBHD15-MALE);
- Ethernet Cross-over-Kabel (1-KAB239-2);
- HBM Software catman®AP, inklusive Softwarewartung für
die ersten 12 Monate;
Optionales Zubehör:
- Anschluss von Thermoelementen: 1-THERMO-MXBOARD;
- Anschluss von DMS-Viertelbrücken: 1-SCM-SG120/350;
- Anschluss von 300 V CAT II: 1-SCM-HV;
- Anschluss von 10 V, 60 oder IEPE über BNC:
1-SUBHD15-BNC.

expand_more

chevron_left

Überblick
Dokumente
Downloads
Specifications
Accessories

chevron_right

QuantumX and MX440B: 24-Bit Universal Measuring Amplifier for All Common Sensor Technologies

The MX440B module is the universal measuring amplifier of the QuantumX series. This means that sensors and transducers based on 17 different sensor technologies can be connected to each of the 4 channels available on this amplifier (see complete survey below). Owing to the innovative “Plug & Measure” technology, the QuantumX module automatically identifies your transducer and is immediately ready to start measuring.

The universal measuring amplifiers of the QuantumX family thus substantially minimize the setup time in the test stand and are the ideal choice for frequently changing measuring tasks. As always with the QuantumX, the universal measuring amplifiers can be employed as stand-alone instruments or combined with other modules; this can be achieved in various topologies (centralized, distributed, hybrid) as well as by connecting them to a PC (e.g. with HBM catman software) or a data recorder (e.g. for mobile measurements). The resulting flexibility and scalability are definitely unique in the market.

The universal modules provide a 24-bit analog-to-digital converter, sample rates of 40 kS/s per channel, and active low-pass filters and are renowned for their high precision.

The combination of precision, flexibility, and measurement setup at lightning speed makes each QuantumX universal measuring amplifier an “all-purpose tool” for demanding and highly efficient data acquisition in measurement, which has already been used in tens of thousands of applications. Typical applications include test stands, service tasks, mobile data acquisition, and monitoring.

Accuracy class: up to 0.05%
Sample rate per channel: up to 40 kS/s

catman®AP

catmanAP includes the full catmanEasy software package which includes online and offline setup, online visualizations, and online maths as well as recording functionalities and can be combined with two different add-on modules:

EasyMath: Mathematics module and auto sequences for catmanEasy.
EasyScript: Free programming under VBA in measurement and analysis mode.

and adds to it powerful modules such as:

GNSS/GPS data visualization on maps
Video Recording
Wheelforce transducer integration
Parallel Recording
Cloud data streaming

Time-saving and efficient

Connection of 17 different transducer technologies per channel
Plug & Measure: Automatic sensor identification and channel configuration
Fast calibration of transducers or validation through internal shunt connection
Custom configuration of individual channels
Wide ambient temperature range (-20 °C to +65 °C) and robust design allow use in any location
Distributed system and short, pre-wired sense leads

Minimized setup time in the test stand and an ideal fit for frequently changing measurement tasks, due to immediate sensor identification and universal connectors.

Precise and reliable

24-bit analog-to-digital converter per channel
Individual sample rates of up to 40 kS/s
Active low-pass filter
Accuracy classes ranging from 0.05 to 0.1 (depending on the sensor technology)
Working standard calibration certificate according to ISO 10012 stored in the module
DAkkS certificate (ISO 17025) from HBM on request

Reliable results and proven high quality from HBM ensure successful tests at any time!

Compact, mobile, and scalable

The modules can be used as stand-alone instruments or combined with other measuring modules
Many measuring modules for special tasks are available (e.g. high-precision, torque, full bridges, etc.)
Different topologies (centralized, distributed, hybrid)
Real-time integration with the Ethernet fieldbus (CX27B), CAN (MX471B), or voltage output (MX878B)
Open software concept (Visual Studio .NET, LabVIEW, etc.)

From one to thousands of channels: Measuring equipment that is scalable to fit your requirements and integrates with your system.

MX440B - Datenblatt	Data Sheets	English
catman - Datenblatt	Data Sheets	English
MX440B - Datenblatt	Data Sheets	German
MX440B - Datenblatt	Data Sheets	Chinese
MX440B - Datenblatt	Data Sheets	Japanese
catman - Datenblatt	Data Sheets	French
catman - Datenblatt	Data Sheets	German
catman - Bedienungsanleitung	Manuell	English
catman - Bedienungsanleitung	Manuell	German

Sales documents

QuantumX - Broschüre	Broschüre	English
QuantumX - Broschüre	Broschüre	German
QuantumX - Broschüre	Broschüre	Portuguese
QuantumX - Broschüre	Broschüre	Chinese
QuantumX - Broschüre	Broschüre	Japanese

Certificates and Approvals

QuantumX - Konformitätserklärung

Declaration of Conformity

English

MX440B - CAD Download (Step Datei)

CAD Step Files

Key attributes: DAQ Systems
Anzahl der Eingänge	4
Eingang	Strain gauge full/half bridge, Electrical voltage, Standardized current (4-20mA), Inductive bridge, LVDT, SSI, IEPE / CCLD, Piezo resistive bridge, Thermocouples, RTD (Pt, Ni), Resistance (PTC, NTC, KTY), Digital encoder, Timer digital input
Ausgang	None
Interface	TCP/IP, Firewire
Genauigkeitsklasse	0.05, 0.1
Schutzart	IP20
Messrate	40000 Hz
Gehäuse	Standalone
Echtzeitfähigkeiten	None

Main Menu

Main Menu

Main Menu

Main Menu

QuantumX Paket: MX440B + catmanAP

QuantumX and MX440B: 24-Bit Universal Measuring Amplifier for All Common Sensor Technologies

catman®AP

Time-saving and efficient

Precise and reliable

Compact, mobile, and scalable

We haved moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com