应变片附件
应变片安装的质量不仅取决于应变片本身,还取决于应用类型及其实施。一个功能完美的测量点需要对应用表面进行彻底的处理,仔细的粘合,
LB 11 和 TB 21 柱式应变片使用非常方便,非常适合测量螺钉和螺栓的应力状况。
螺栓是用于连接各种部件的常见结构元件。LB11 和 TB21 系列圆柱形应变片专门设计用于测量螺栓、螺钉和其他轴向结构元件的应变、力和振动。
它们配有铜引线,可直接用于预钻孔螺栓元件。或是,需要在结构中钻孔,直径2mm。LB11 和 TB21 都是柱状应变片,可在 -200 °C 至 +140 °C 的温度范围内使用。
便于在狭小空间中进行应变、力和振动测量。
理想匹配测量应用的需求。
节省您的时间,立即可用!
| LB11 - 數據表 | 數據表 | English |
| TB21 - 數據表 | 數據表 | English |
| LB11 - 數據表 | 數據表 | German |
| TB21 - 數據表 | 數據表 | German |
Certificates and Approvals
| Strain Gauges - 符合性聲明 | 符合性聲明 | English |
| Type/technology | Foil strain gauge |
| Application | Stress Analysis / structural testing |
| Geometry | Linear, T rosette |
| Measuring grid length | 3 mm |
| Measuring grid length | 0.118 in |
| Measuring grid width | 5 mm |
| Measuring grid width | 0.197 in |
| Carrier length | 11.5 mm |
| Carrier length | 0.453 in |
| Carrier width | 6 mm, 1.9 mm |
| Carrier width | 0.236 in |
| Temperature range | Limited temperature range |
| Nominal resistance | 120 Ohms, 1000 Ohms |
| Gauge factor (measuring grid material) | Constantan (ca 2.0) |
| Temperature response | Ferritic steel (10.8 ppm/K; 6.0 ppm/°F) |
| Maximum elongation | Standard |
| Fatigue life | Standard |
| Connection configuration | Leads, Enamelled copper wires |
| Mounting | Embeddable |
| Grid protection | Open face |
List of accessories available for all variants of this family
| Product Code | Description |
|---|---|
1-EP70
|
热固化双组份胶粘剂EP70 |
1-RMS1-300
|
RMS1 溶剂混合物 300 ml |
K-KAB-ML
|
测量电缆 |
The installation of cylindric strain gauges in bolts differs from conventional installations on flat surfaces. Learn how to integrate this special gauge in a screw.