3333A Vibration Transducer

3333A

Dytran series 3333 is a miniature IEPE triaxial accelerometer with a low end frequency response used in modal and structural analysis, NVH, squeak & rattle testing, vibration control as well as for general purpose triaxial vibration measurements.

chevron_left
chevron_right

Dytran series 3333 is a miniature IEPE triaxial accelerometer with a low end frequency response used in modal and structural analysis, NVH, squeak & rattle testing, vibration control as well as for general purpose triaxial vibration measurements.

Filter

close
  • Measurement range keyboard_arrow_down
  • Measurement range keyboard_arrow_down
  • Application keyboard_arrow_down
  • Weight keyboard_arrow_down
  • Sensitivity tolerance keyboard_arrow_down
  • Sensitivity keyboard_arrow_down
  • Maximum Temperature keyboard_arrow_down
  • Maximum Temperature keyboard_arrow_down
  • Mounting keyboard_arrow_down
  • Electrical connector location keyboard_arrow_down
  • TEDS keyboard_arrow_down
Clear All
Apply Filters
Filter tune
3333A Vibration Transducer Data Sheets English
3333A
Type/technology Piezoelectric CCLD (IEPE)
Direction/Axes Triaxial
Measurement range 1000 m/s², 5000 m/s², 500 m/s², 50000 m/s², 2000 m/s², 10000 m/s²
Measurement range 100 g, 500 g, 50 g, 5000 g, 200 g, 1000 g
Application General purpose, Miniature/ESS
Weight 2.4 g, 4 g, 2.3 g
Weight 0.08 oz, 0.14 oz
Sensitivity tolerance 5 %, 15 %
Sensitivity 50 mV/g, 10 mV/g, 100 mV/g, 1 mV/g, 25 mV/g, 5 mV/g
Lower frequency 0.54 Hz
Higher frequency 10 kHz
Minimum Temperature -50 °C
Maximum Temperature 105 °C, 82 °C, 120 °C
Minimum Temperature -60 °F
Maximum Temperature 225 °F, 180 °F, 250 °F
Mounting Stud mounting, Adhesive mounting
Resonance frequency 24 kHz
Real-time capabilities None
Electric isolation None
Output signal (connectivity) Analogue
Electrical connector location Side, Integral cable
TEDS Yes, No
Filtering None