7583A2 Vibration Transducer

7583A

Dytran series 7583 is a high precision triaxial variable capacitance (VC) accelerometer that is used in road load testing, flight testing, in-flight vibration testing, flutter testing, low frequency aircraft/airframe vibration measurements, and structural dynamics.

chevron_left
chevron_right

Dytran series 7583 is a high precision triaxial variable capacitance (VC) accelerometer that is used in road load testing, flight testing, in-flight vibration testing, flutter testing, low frequency aircraft/airframe vibration measurements, and structural dynamics.

Filter

close
  • Measurement range keyboard_arrow_down
  • Measurement range keyboard_arrow_down
  • Sensitivity keyboard_arrow_down
  • Higher frequency keyboard_arrow_down
  • Resonance frequency keyboard_arrow_down
Clear All
Apply Filters
Filter tune
7583A Vibration Transducer Data Sheets English
7583A
Type/technology MEMS-based
Direction/Axes Triaxial
Measurement range 100 m/s², 2000 m/s², 1000 m/s², 50 m/s², 300 m/s²
Measurement range 10 g, 200 g, 100 g, 5 g, 30 g
Application General purpose
Weight 38 g
Weight 1.34 oz
Sensitivity tolerance 10 %
Sensitivity 400 mV/g, 20 mV/g, 40 mV/g, 800 mV/g, 133 mV/g
Lower frequency 0 Hz
Higher frequency 1.8 kHz, 2.2 kHz, 2.8 kHz, 1 kHz, 2.1 kHz
Minimum Temperature -55 °C
Maximum Temperature 125 °C
Minimum Temperature -67 °F
Maximum Temperature 257 °F
Mounting Stud mounting
Resonance frequency 4 kHz, 7 kHz, 6 kHz, 3 kHz, 5 kHz
Real-time capabilities None
Electric isolation None
Output signal (connectivity) Analogue
Electrical connector location Side
TEDS No
Filtering None