7533A Vibration Transducer

7533A

Dytran series 7533 is a triaxial DC response accelerometer used in flight testing, general purpose vibration testing, as well as road load and durability testing

chevron_left
chevron_right

Dytran series 7533 is a triaxial DC response accelerometer used in airbag testing, crash testing, robotics, seismic monitoring and tilt measurement.

Filter

close
  • Measurement range keyboard_arrow_down
  • Measurement range keyboard_arrow_down
  • Sensitivity keyboard_arrow_down
  • Maximum Temperature keyboard_arrow_down
  • Maximum Temperature keyboard_arrow_down
  • Electrical connector location keyboard_arrow_down
Clear All
Apply Filters
Filter tune
7533A Vibration Transducer Data Sheets English
7533A
Type/technology MEMS-based
Direction/Axes Triaxial
Measurement range 400 m/s², 30 m/s², 20 m/s², 50 m/s², 160 m/s², 2000 m/s²
Measurement range 40 g, 3 g, 2 g, 5 g, 16 g, 200 g
Application General purpose
Weight 6 g
Weight 0.21 oz
Sensitivity tolerance 5 %
Sensitivity 20 mV/g, 300 mV/g, 420 mV/g, 174 mV/g, 57 mV/g, 6.5 mV/g
Lower frequency 0 Hz
Higher frequency 1.5 kHz, 1.6 kHz
Minimum Temperature -40 °C
Maximum Temperature 125 °C, 85 °C
Minimum Temperature -40 °F
Maximum Temperature 257 °F, 185 °F
Mounting Center bolt mounting
Resonance frequency 4.5 kHz
Real-time capabilities None
Electric isolation None
Output signal (connectivity) Analogue
Electrical connector location Integral cable, Side
TEDS No
Filtering None