SLB700A

The screw-on SLB700 strain sensor is based on the principle that an applied force always results in strain on an object. This strain can be reliably measured. Since the strain is generally proportional to the force, the SLB700A sensor enables the applied force to be reliably determined.

SLB700A

expand_more

chevron_left

chevron_right

SLB700 Strain Sensor: A Cost-Effective Sensor for Indefinitely High Forces

The advantage of this cost-effective sensor is that it enables even extremely large forces to be reliably measured. Additionally, the sensor does not affect the monitored machine’s dynamics.

The SLB700 is a strain transducer. This means that the output signal is higher by a factor of 2.3 when compared to a bonded strain gauge installation. This allows using the sensor with objects, like presses, which show only minimal deformation under load.

The sensor materials withstand most of the oils, which are used in applications involving presses, and are rustproof.

Practical

Easy mounting using four M6 screws
Oil-resistant and a highly flexible cable, suitable for drag chains
Sensor adjusted to 1,000 ohms; suitable to be connected in parallel for compensation of undesired parasitic, mechanical effects.

Reliable use, easy installation: even in harsh production environments. Benefit from the sensor’s electrical adjustment and install multiple sensors on a single amplifier input.

Cost-effective

A cost-effective solution that provides an alternative to force sensors, particularly when large process forces [R1] are involved.
Does not affect the machine’s dynamics.

The cost-effective alternative to the classical load cell: Ideal, particularly with high process forces; does not affect the machine’s dynamics.

All-inclusive

In addition to the SLB, HBK also provides sensors for calibrating the SLB (e.g. C6A)
Our service staff looks forward to calibrating your measurement chain for you
Matching PMX amplifier with integrated calibration routines

Minimal total cost of ownership: HBK helps you find the complete solution that meets your requirements–contact us for further details!

Code	Nom
1-SLB700A/06-1	Extensomètre SLB700a avec 6m câble
1-SLB700A/12-1	Extensomètre SLB700a avec 12m câble

SLB700 - Caractéristiques techniques	Data Sheets	English
SLB700 - Caractéristiques techniques	Data Sheets	German
SLB700 - Caractéristiques techniques	Data Sheets	Italian
SLB700 - Caractéristiques techniques	Data Sheets	French
SLB700 - Notice de montage	Mounting Instructions	English, French, German

Certificates and Approvals

SLB700A,SLB700A/06VA - Déclaration de Conformité

Declaration of Conformity

English

SLB700A
Type/technology	Strain Gauge
Capacity (strain)	500 μm/m
Capacity (strain)	500 μm/m
Output signal	mV/V (passive strain gauge)
Degree of protection	IP65
Mechanical adaptation	Bolted
Minimum Temperature	-20 °C
Maximum Temperature	60 °C
Minimum Temperature	-4 °F
Maximum Temperature	140 °F

Main Menu

Main Menu

Main Menu

Main Menu

Find Your Sensor

SLB700A

Practical

Cost-effective

All-inclusive

Nous avons déménagé ${referer} vers www.hbkworld.com

Nous avons déménagé ${referer} vers www.hbkworld.com

Nous avons déménagé ${referer} vers www.hbkworld.com

Nous avons déménagé ${referer} vers www.hbkworld.com

Nous avons déménagé ${referer} vers www.hbkworld.com

Nous avons déménagé ${referer} vers www.hbkworld.com