VU (pont complet)

Full bridge strain gauges of A series coming with four measurement grids already completing the wheatstone bridge. This could be used for a variaty of different applications where only side of a specimen allows an strain gauge installation.

Different sizes including miniature designs.
Aluminum or steel adapted temperature response.
Up to 5000 Ohm resistance.

VU (pont complet)

expand_more

chevron_left

chevron_right

U Series Transducer Strain Gauges: Enhanced sensitivity and modulus compensated

Combining MODCO (modulus compensated) measuring grid foils with high-performance modified PEEK carrier material provides strain gauges that unite easy handling with high accuracy and outstanding humidity behavior. U series strain gauges also offer a compensated modulus of elasticity, increased sensitivity, and enhanced fatigue strength at high strains.

U series comes in different geometries, resistance values, and grid lengths as standard. Custom designs can be developed in just a few weeks.

Robust

Excellent chemical resistance
Very low water absorption and resistance to humidity
Small radii of curvature are possible, allowing for installation in small drill holes

Easy handling during installation and long service life.

Precise

Very high stiffness (modulus of elasticity) and, thus, capable of transferring the measuring body’s deformation directly to the measuring grid
Higher thermal conductivity than polyimide

Suitable for transducers with high accuracy requirements.

Flexible

Over 30 different standard versions for steel or aluminum with 10 different creep adjustments
Various options available such as encapsulation, pre-coating with adhesive, or pre-tinned solder tabs
Custom designs possible

Perfect for your solution, regardless of whether it is standard or custom.

Filtrer

Adaptation de la réponse en température keyboard_arrow_down
Méthode de fixation keyboard_arrow_down
Largeur de la grille de mesure keyboard_arrow_down
Largeur de la grille de mesure keyboard_arrow_down
Longueur de la grille de mesure keyboard_arrow_down
Longueur du support keyboard_arrow_down
Longueur du support keyboard_arrow_down
Largeur du support keyboard_arrow_down
Largeur du support keyboard_arrow_down

Code	Longueur de la grille de mesure	Longueur de la grille de mesure	Largeur de la grille de mesure	Largeur de la grille de mesure	Longueur du support	Longueur du support	Largeur du support	Largeur du support	Adaptation de la réponse en température	Méthode de fixation
1-VU21K3/1K0_E	3 mm	0.118 in	2.1 mm	0.083 in	17.8 mm	0.701 in	7 mm	0.276 in	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F), Acier (10,8 ppm/K)	Bondable, Collé
1-VU23K3/1K0_E	3 mm	0.118 in	2.1 mm	0.083 in	17.8 mm	0.701 in	7 mm	0.276 in	Aluminium (23 ppm/K; 12.8 ppm/°F), Aluminium (23 ppm/K)	Bondable, Collé
1-VU61K2.5/1K0_E	2.5 mm	0.098 in	2.6 mm	0.102 in	10.4 mm	0.409 in	9.1 mm	0.358 in	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F), Acier (10,8 ppm/K)	Bondable, Collé
1-VU63K2.5/1K0_E	2.5 mm	0.098 in	2.6 mm	0.102 in	10.4 mm	0.409 in	9.1 mm	0.358 in	Aluminium (23 ppm/K; 12.8 ppm/°F), Aluminium (23 ppm/K)	Bondable, Collé
K-VU21K3/1K0BE	3 mm	0.118 in	2.1 mm	0.083 in	17.8 mm	0.701 in	7 mm	0.276 in	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F), Acier (10,8 ppm/K)	Bondable (adhesive pre-applied), Collable (prérevêtement adhésif)
K-VU21K3/1K0LE	3 mm	0.118 in	2.1 mm	0.083 in	17.8 mm	0.701 in	7 mm	0.276 in	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F), Acier (10,8 ppm/K)	Bondable, Collé
K-VU23K3/1K0BE	3 mm	0.118 in	2.1 mm	0.083 in	17.8 mm	0.701 in	7 mm	0.276 in	Aluminium (23 ppm/K; 12.8 ppm/°F), Aluminium (23 ppm/K)	Bondable (adhesive pre-applied), Collable (prérevêtement adhésif)
K-VU23K3/1K0LE	3 mm	0.118 in	2.1 mm	0.083 in	17.8 mm	0.701 in	7 mm	0.276 in	Aluminium (23 ppm/K; 12.8 ppm/°F), Aluminium (23 ppm/K)	Bondable, Collé
K-VU61K2.5/1K0BE	2.5 mm	0.098 in	2.6 mm	0.102 in	10.4 mm	0.409 in	9.1 mm	0.358 in	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F), Acier (10,8 ppm/K)	Bondable (adhesive pre-applied), Collable (prérevêtement adhésif)
K-VU61K2.5/1K0LE	2.5 mm	0.098 in	2.6 mm	0.102 in	10.4 mm	0.409 in	9.1 mm	0.358 in	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F), Acier (10,8 ppm/K)	Bondable, Collé
K-VU63K2.5/1K0BE	2.5 mm	0.098 in	2.6 mm	0.102 in	10.4 mm	0.409 in	9.1 mm	0.358 in	Aluminium (23 ppm/K; 12.8 ppm/°F), Aluminium (23 ppm/K)	Bondable (adhesive pre-applied), Collable (prérevêtement adhésif)
K-VU63K2.5/1K0LE	2.5 mm	0.098 in	2.6 mm	0.102 in	10.4 mm	0.409 in	9.1 mm	0.358 in	Aluminium (23 ppm/K; 12.8 ppm/°F), Aluminium (23 ppm/K)	Bondable, Collé

U Series (for OEM) - Caractéristiques techniques	Data Sheets	English
U Series (for OEM) - Caractéristiques techniques	Data Sheets	German

Certificates and Approvals

Strain Gauges - Déclaration de Conformité

Declaration of Conformity

English

VU (Full bridge)
Type/technology	Foil strain gauge
Application	Manufacturing transducers
Geometry	Full bridge circuit
Measuring grid length	3 mm, 2.5 mm
Measuring grid length	0.118 in, 0.098 in
Measuring grid width	2.1 mm, 2.6 mm
Measuring grid width	0.083 in, 0.102 in
Carrier length	17.8 mm, 10.4 mm
Carrier length	0.701 in, 0.409 in
Carrier width	7 mm, 9.1 mm
Carrier width	0.276 in, 0.358 in
Temperature range	Standard (up to 200°C)
Nominal resistance	1000 Ohms
Gauge factor (measuring grid material)	Cr-Ni alloy (ca. 2.2)
Temperature response	Aluminium (23 ppm/K; 12.8 ppm/°F), Ferritic steel (10.8 ppm/K; 6.0 ppm/°F)
Maximum elongation	Standard
Fatigue life	Standard
Connection configuration	Integrated solder tabs
Mounting	Bondable, Bondable (adhesive pre-applied)
Grid protection	Covered

List of accessories available for all variants of this family

Product Code	Description
1-EP310N	Colle à chaud 2 comp. EP310N
1-P250	Colle résine monocomposant P250 - 2 x 15
1-NG120	Caoutchouc nitrile NG120
1-RMS1-300	RMS1 mélange de solvants 300 ml
K-KAB-ML	Câble de mesure au mètre