MA (rosette à membrane)

Membrane Rosettes strain gauges of A series coming with four measurement grids already completing the wheatstone bridge. Typical applications are measuring pressure via a membrane.

Different sizes including miniature designs.
Aluminum or steel adapted temperature response.
Up to 350 Ohm resistance.

expand_more

chevron_left

chevron_right

A Series Transducer Strain Gauges: Ensure Maximum Precision and Quality of Your Transducers

The A series universal strain gauges are optimised for transducer manufacturers. Combining the most common constantan measuring grid foils with a high-performance modified PEEK carrier material provides strain gauges that unite easy handling with high accuracy and outstanding humidity behavior.

A series come in different geometries, resistance values, and grid lengths as standard. Custom designs can be developed in just a few weeks.

Robust

Excellent chemical resistance
Very low water absorption and resistance to humidity
Small radii of curvature are possible, allowing for installation in small drill holes

Easy handling during installation and long service life.

Precise

Very high stiffness (modulus of elasticity) and, thus, capable of transferring the measuring body’s deformation directly to the measuring grid
Higher thermal conductivity than polyimide

Suitable for transducers with high accuracy requirements.

Flexible

Over 30 different standard versions for steel or aluminum with 10 different creep adjustments
Various options available such as encapsulation, pre-coating with adhesive, or pre-tinned solder tabs
Custom designs possible

Perfect for your solution, regardless of whether it is standard or custom.

Filtrer

Protection de la grille de mesure keyboard_arrow_down
Résistance nominale keyboard_arrow_down
Longueur de la grille de mesure keyboard_arrow_down
Longueur de la grille de mesure keyboard_arrow_down
Longueur du support keyboard_arrow_down
Longueur du support keyboard_arrow_down
Largeur du support keyboard_arrow_down
Largeur du support keyboard_arrow_down

Code	Longueur de la grille de mesure	Longueur de la grille de mesure	Largeur de la grille de mesure	Largeur de la grille de mesure	Longueur du support	Longueur du support	Largeur du support	Largeur du support	Résistance nominale	Protection de la grille de mesure
1-MA11M10/350LE	10 mm	0.394 in	10 mm	0.394 in	11.5 mm	0.452 in	11.5 mm	0.452 in	350 Ohms, 350 ohms	Covered, Protégée
1-MA11M10/350_W	10 mm	0.394 in	10 mm	0.394 in	11.5 mm	0.452 in	11.5 mm	0.452 in	350 Ohms, 350 ohms	Open face, Non protégée
1-MA11M15/1K0LE	15 mm	0.591 in	15 mm	0.591 in	16.7 mm	0.657 in	16.7 mm	0.657 in	350 Ohms, 350 ohms	Covered, Protégée
1-MA11M15/1K0_W	15 mm	0.591 in	15 mm	0.591 in	16.7 mm	0.657 in	16.7 mm	0.657 in	1000 Ohms, 1000 ohms	Open face, Non protégée
1-MA11M15/350LE	15 mm	0.591 in	15 mm	0.591 in	16.7 mm	0.657 in	16.7 mm	0.657 in	350 Ohms, 350 ohms	Covered, Protégée
1-MA11M15/350_W	15 mm	0.591 in	15 mm	0.591 in	16.7 mm	0.657 in	16.7 mm	0.657 in	350 Ohms, 350 ohms	Open face, Non protégée

A Series (for OEM) - Caractéristiques techniques	Data Sheets	English
A Series (for OEM) - Caractéristiques techniques	Data Sheets	German

Certificates and Approvals

Strain Gauges - Déclaration de Conformité

Declaration of Conformity

English

MA (Membrane rosette)
Type/technology	Foil strain gauge
Application	Manufacturing transducers
Geometry	Diaphragm rosette
Measuring grid length	10 mm, 15 mm
Measuring grid length	0.394 in, 0.591 in
Measuring grid width	10 mm, 15 mm
Measuring grid width	0.394 in, 0.591 in
Carrier length	11.5 mm, 16.7 mm
Carrier length	0.452 in, 0.657 in
Carrier width	11.5 mm, 16.7 mm
Carrier width	0.452 in, 0.657 in
Temperature range	Standard (up to 200°C)
Nominal resistance	350 Ohms, 1000 Ohms
Gauge factor (measuring grid material)	Constantan (ca 2.0)
Temperature response	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F)
Maximum elongation	Standard
Fatigue life	Standard
Connection configuration	Leads
Mounting	Bondable
Grid protection	Covered, Open face

List of accessories available for all variants of this family

Product Code	Description
1-EP310N	Colle à chaud 2 comp. EP310N
1-P250	Colle résine monocomposant P250 - 2 x 15
1-NG120	Caoutchouc nitrile NG120
1-RMS1-300	RMS1 mélange de solvants 300 ml
K-KAB-ML	Câble de mesure au mètre