
Aufgrund ihrer praktischen Größe und zylindrischen Form eignen sich die Dehnungsmessstreifen LB11 und TB21 ideal für Messungen an Schrauben und Bolzen.
Zylindrische DMS (LB11/TB21)
Schrauben sind ein übliches Konstruktionselement, das zur Verbindung verschiedener Komponenten verwendet wird. Die zylindrischen Dehnungsmessstreifen der Serien LB11 und TB21 mit Anschlussdrähten wurden speziell für die Messung von Dehnung, Kraft und Vibration in Bolzen, Schrauben und anderen axialen Konstruktionselementen entwickelt.
Sie wurden mit Kupferleitungen ausgestattet und können direkt in vorgebohrten Bolzenelementen verwendet werden. Dazu ist eine 2 mm Bohrung in der Struktur erforderlich. Sowohl LB11 als auch TB21 sind als röhrenförmige Dehnungsmessstreifen erhältlich, die in einem Temperaturbereich von —200 °C bis +140 °C verwendet werden können
.Ermöglicht Dehnungs-, Kraft- und Schwingungsmessungen auf engstem Raum.
Ideal auf die Bedürfnisse der Messanwendung abgestimmt.
Sparen Sie Zeit und probieren Sie es gleich aus!
Code | Geometrie | Trägerbreite | Nennwiderstand | Anschlusskonfiguration | Messgitterlänge | Messgitterlänge | Messgitterbreite | Messgitterbreite | Trägerlänge | Trägerbreite | Befestigungmethode |
---|---|---|---|---|---|---|---|---|---|---|---|
1-LB11-3/120ZW | Linear, Linear | 6 mm | 120 Ohm, 120 Ohms | Anschlussbändchen, Leads | 3 mm | 0.118 in | 5 mm | 0.197 in | 0.453 in | 0.236 in | Einbettbar, Embeddable |
1-TB21-3.3/1000HW | T-Rosette, T rosette | 1.9 mm | 1000 Ohm, 1000 Ohms | Kupferlackdraht, Enamelled copper wires | - | - | - | - | - | - | - |
LB11 - Datenblatt | Data Sheets | German |
LB11 - Datenblatt | Data Sheets | English |
TB21 - Datenblatt | Data Sheets | German |
TB21 - Datenblatt | Data Sheets | English |
Certificates and Approvals
Strain Gauges - Konformitätserklärung | Declaration of Conformity | English |
Type/technology | Foil strain gauge |
Application | Stress Analysis / structural testing |
Geometry | Linear, T rosette |
Measuring grid length | 3 mm |
Measuring grid length | 0.118 in |
Measuring grid width | 5 mm |
Measuring grid width | 0.197 in |
Carrier length | 11.5 mm |
Carrier length | 0.453 in |
Carrier width | 6 mm, 1.9 mm |
Carrier width | 0.236 in |
Temperature range | Limited temperature range |
Nominal resistance | 120 Ohms, 1000 Ohms |
Gauge factor (measuring grid material) | Constantan (ca 2.0) |
Temperature response | Ferritic steel (10.8 ppm/K; 6.0 ppm/°F) |
Maximum elongation | Standard |
Fatigue life | Standard |
Connection configuration | Leads, Enamelled copper wires |
Mounting | Embeddable |
Grid protection | Open face |
The installation of cylindric strain gauges in bolts differs from conventional installations on flat surfaces. Learn how to integrate this special gauge in a screw.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, MicroStrain and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.