1/2" DRUCKFELDMIKROFON, EXTERN POLARISIERT
Druckfeldmikrofon, das für hochpräzise Kopplermessungen oder ANSI-Geräuschmessungen über einen Frequenzbereich von 3,15 Hz bis 20 kHz entwickelt wurde.
TYPE 4192
Der Typ 4192 ist für hochpräzise Kopplermessungen oder ANSI-Geräuschmessungen konzipiert. Da der Typ 4192 extern polarisiert ist, muss er mit einem klassischen Vorverstärker verwendet werden.
Select filters:
| Code | Lower dynamic range | Minimaltemperatur | Maximaltemperatur | Minimaltemperatur | Maximaltemperatur |
|---|---|---|---|---|---|
| -4192-B-001- | 20.7 dB | -20 °C | 80 °C | -4 °F | 176 °F |
| -4192-C-001- | 20.7 dB | -20 °C | 80 °C | -4 °F | 176 °F |
| -4192-L-001- | 20.7 dB | -20 °C | 80 °C | -4 °F | 176 °F |
| -4192-W-005- | 19 dB | -30 °C | 300 °C | -22 °F | 572 °F |
| TEDS Microphones | Data Sheets | English |
| ½-inch Condenser Microphone Cartridge Types 4192-S and 4192-T, for Calibration Systems | Data Sheets | English |
| TEDS Microphones | Data Sheets | Japanese |
| Standard | IEC 61094 |
| Sound field | Pressure field |
| Polarization | Classical |
| Sensitivity | 12.5 mV/Pa |
| Lower frequency | 3.15 Hz |
| Higher frequency | 20 kHz |
| Lower dynamic range | 20.7 dB, 19 dB |
| Higher dynamic range | 162 dB |
| Diameter | 1/2 inch |
| Venting | Side |
| Minimum Temperature | -20 °C, -30 °C |
| Maximum Temperature | 80 °C, 300 °C |
| Minimum Temperature | -4 °F, -22 °F |
| Maximum Temperature | 176 °F, 572 °F |
| Output signal (connectivity) | Passive |
List of accessories available for all variants of this family
The unit is assembled in a clean-room environment and sealed together, after which it is assigned one single type number and one single serial number. This means that the combined unit has better precision and long-time stability, and is handled as one complete unit.
The unit also contains TEDS, which means that information about the serial number, type and sensitivity is stored within it.
-4228---
-4231---
DP-0776---
UA-0459---
EU-4000---