U15

The cost-effective U15 reference force transducer can be used as a transfer standard and as a master sensor. Measuring range: 10 to 100 % of its capacity.

U15

expand_more

chevron_left

chevron_right

U15 Reference Force Transducer: Calibrating Forces from 2.5 kN to 2.5 MN

The U15 precision load cell (reference force transducer) reliably measures tensile and compressive force up to 2.5 MN. It is ideally suited for use as the master sensor in calibration machines, for challenging tasks in test benches, and as a transfer standard (e.g. when verifying or calibrating material testing machines or performing transfer measurements to ensure traceability of calibration machines to a standard).

Thanks to its very low displacement under load, the test stand remains stable. The U15’s high output signal (>4 mV/V from 25 kN) enables high resolution, an excellent signal-to-noise ratio, and low measurement uncertainty, allowing optimal utilization of the downstream electronics’ full measuring range.

U15 meets the requirements of class 0.5 in accordance with ISO 376. Its radially symmetrical design makes the sensor insensitive to temperature gradients. Built from stainless steel with a high IP67 degree of protection, the U15 precision load cell is extremely robust and durable.

Accuracy class (per ISO 376:2011): 0.5 in the range of 10 % and 100 % of the nominal load
HBK accuracy class: 0.02 to 0.05
Nominal (rated) measuring range: 2.5 kN to 2.5 MN

High accuracy class

Complies with the requirements of accuracy class 0.5 per ISO 376 in the range between 10 % and 100 % of its capacity
High output signal, > 4 mV/V for many capacities
Signal adjustment to 3 mV/V available as an option
Excellent signal-to-noise ratio
Good repeatability in varying mounting positions through electronic bending moment compensation
Transfer standard for tensile and compressive force up to 1 MN

Standard-compliant precision, also under unfavorable conditions of use. Absolute reliability.

Individual configuration

Double bridge version available on request: One output can be used as a reference signal, one output as an input for the machine control (also for machines with high forces and loads).
Application-oriented accessories such as TEDS, ISO 376-compliant load application and knuckle eyes
HBK enables the U15 together with the amplifier to be calibrated as a measurement chain (competence of the HBK calibration laboratory)
Option: Delivery as a calibrated product (calibration through HBK’s ISO 17025-accredited calibration laboratory)

Optimal complete solution including calibrated accessories for reliable transfer measurement

Small displacement

Small displacement
As a result: High stiffness and excellent dynamic behavior
High resonance frequency for dynamic calibration tasks
Robust due to IP67 degree of protection and hermetic sealing resulting in outstanding long-term stability
Small TK₀ and low sensitivity to temperature gradients

Measurement accuracy, even in dynamic or harsh conditions. Minimal displacements.

U15 - Data Sheet	Data Sheets	English
U15 - Data Sheets	Data Sheets	German
U15 - Data Sheet	Data Sheets	Italian
U15 - Data Sheets	Data Sheets	French
U15 - Mounting Instructions	Mounting Instructions	English, Italian, French, Chinese, German

Certificates and Approvals

U10M, U10S, U10F,U15, C10, C15 - EU Declaration of Conformity

Declaration of Conformity

English

U15 capacity 2.5 kN-10kN - CAD	CAD Step Files
U15 capacity 25 kN-50kN - CAD	CAD Step Files
U15 capacity 100 kN-250 kN - CAD	CAD Step Files
U15 capacity 500 kN - CAD	CAD Step Files
U15 capacity 1 MN - CAD	CAD Step Files
U15 capacity 2.5 MN - CAD	CAD Step Files

U15
Maximum capacity (nominal load)	2.5 kN, 5 kN, 10 kN, 25 kN, 50 kN, 100 kN, 250 kN, 500 kN, 1 MN, 2.5 MN
Maximum capacity (nominal load)	562 lbf, 1.12 klbf, 2.25 klbf, 5.62 klbf, 11.2 klbf, 22.5 klbf, 56.2 klbf, 112 klbf, 225 klbf, 562 klbf
Tensile / compression	Compression, Tension, Both directions
Type/technology	Strain Gauge
Calibration	Fulfills ISO 376
Output signal	mV/V (passive strain gauge)
HBK Accuracy class	0.5 (ISO376)
Degree of protection	IP67
Mechanical adaptation	Central thread
Height (without accessories)	114.5 mm, 174.5 mm, 217.3 mm, 307.3 mm, 465.3 mm
Height (without accessories)	4.51 in, 6.87 in, 8.56 in, 12.1 in, 18.32 in
Diameter (without cable or plug)	104.8 mm, 153.9 mm, 203.2 mm, 279 mm, 390 mm
Diameter (without cable or plug)	8.27 in, 10.59 in, 14.49 in, 15.35 in

Product Code	Description
1-Z4/20KN/ZGOW	Knuckle eye top for Z4A, U15
1-Z4/20KN/ZGUW	Knuckle eye below for Z4A, U10, U15
1-ZGAM33F	Knuckle eye M33 extern.thread f.U10M/U15
1-ZGAM42F	Knuckle eye M42 extern.thread f.U10M/U15
1-ZGAM72F	Knuckle eye M72 extern.thread f.U10M/U15
1-ZGIM33F	Knuckle eye M33 intern.thread f.U10M/U15
1-ZGIM42F	Knuckle eye M42 intern.thread f.U10M/U15
1-ZGIM72F	Knuckle eye M72 intern.thread f.U10M/U15
1-U15/1MN/ZKM	Tensile force introduction U15/1MN
1-U15/2.5MN/ZKM	Tensile force introduction for U15/2.5MN
1-U15/250KN/ZKM	Tensile force introduction U15/250kN
1-U15/500KN/ZKM	Tensile force introduction U15/500kN
1-Z4/20KN/ZKM	Tensile force introduction Z4A/20kN
1-EDO4/2.5MN	Thrust Piece to ISO376 for U15/2.5MN
1-EDO4/20KN	Thrust Piece to ISO 376 for Z4A/U15/20kN
1-EDO4/500KN	Thrust Piece to ISO376 for Z4A/U15/500kN
1-U15/250KN/EDO	Thrust Piece U15/250kN
1-U15/500KN/EDO	Thrust Piece U15/500kN
1-CON/BS1	Connector, bayonet for 4 mm-6.5 mm cable
1-CON/BS2	Connector, bayonet for 6.5 mm or larger
1-EEK4	Ground cable, copper, length 400mm
1-EEK6	Ground cable, copper, length 600mm
1-EEK8	Ground cable, copper, length 800mm
1-KAB157-3	Connection cable, bayonet - free ends
1-KAB158-3	Connection cable, thread - free ends
3-3312.0354	Thread connector for U10/C10/U15/C15/C6b
K-CAB-F	Cable, configurable f. force transducers

Showing 10 of 27

이제 사용 가능: 개선된 기술 데이터가 포함된 U15

많은 주요 값(크리프, TK0, 히스테리시스)에 대한 개선된 기술 데이터
확장된 측정 범위: ISO376에 따라 클래스 0.5의 요구 사항을 충족합니다 10%
이제 최대 용량이 2.5 MN인 인장/압축 기준 변환기로도 사용 가능합니다.

광범위한 액세서리

TEDS
ISO 376에 따른 인장력 적용
ISO 376에 따른 추진 조각
너클 아이
다양한 연결 케이블이 다양한 실용적인 길이로 제공되며, 요청 시 증폭기에 연결하기 위해 납땜된 플러그가 있습니다.

자세한 정보는 데이터 시트를 참조하십시오.

완전한 측정 체인: 완벽한 가격에 완벽한 정밀도.

참조 변환기 U15와 정밀 측정 증폭기 모듈 QuantumX MX238B 의 조합은 매우 비용 효율적인 정밀 측정 체인을 만들어냅니다. QuantumX 모듈의 모듈식 설계 덕분에 온도, 전압, 회전 각도와 같은 추가 측정 변수를 통해 이 측정 체인을 쉽게 확장할 수 있습니다.

${referer}를 www.hbkworld.com로 이동했습니다.

이를 통해 HBM, Brüel & Kjær, nCode, ReliaSoft, Discom 브랜드가 하나로 통합되어 더 깨끗하고 건강하며 생산적인 세상을 위해 더 빠르게 혁신할 수 있도록 지원합니다.

${referer}를 www.hbkworld.com로 이동했습니다.

이를 통해 HBM, Brüel & Kjær, nCode, ReliaSoft, MicroStrain 및 Discom 브랜드가 통합되어 더 깨끗하고 건강하며 생산적인 세상을 위해 더 빠르게 혁신할 수 있도록 지원합니다.

Main Menu

Main Menu

Main Menu

Main Menu

Main Menu

Main Menu

Main Menu

Main Menu

U15

U15 Reference Force Transducer: Calibrating Forces from 2.5 kN to 2.5 MN

High accuracy class

Individual configuration

Small displacement

이제 사용 가능: 개선된 기술 데이터가 포함된 U15

광범위한 액세서리

완전한 측정 체인: 완벽한 가격에 완벽한 정밀도.

관련 제품

C15 | 제품 | HBK

변환기 교정 서비스

${referer}를 www.hbkworld.com로 이동했습니다.

${referer}를 www.hbkworld.com로 이동했습니다.

${referer}를 www.hbkworld.com로 이동했습니다.

${referer}를 www.hbkworld.com로 이동했습니다.

${referer}를 www.hbkworld.com로 이동했습니다.

${referer}를 www.hbkworld.com로 이동했습니다.