Extremely precise reference force sensor with a high output signal. Measuring range: 10 to 100 % of its capacity. Class 00 per ISO376.
The C15 reference force transducer is a rugged shear-force sensor – EMC-tested, rustproof, impact and vibration tested – available in nominal (rated) measuring ranges from 2.5 kN to 1 MN. It fulfills the requirements of ISO 376 accuracy class 00 across an exceptionally wide measuring range, from 10% to 100% of the respective capacity.
Thanks to the sensor’s very high output signal – more than 4 mV/V for variants with capacities of 25 kN and above – the C15 enables optimal use of the amplifier’s full measuring range. The result is high resolution and an outstanding signal-to-noise ratio.
The sister model of the C15, the U15 reference force transducer, is ideal for reference force measurements with tensile and compressive forces.
Precise measurements in an exceptionally wide measuring range
Match the measurement system perfectly to the application – with well-engineered accessories, the right amplifiers, and calibration services
Reliably masters dynamic calibration tasks in and outside of the laboratory
| C15 - Data Sheet | Data Sheets | English |
| C15 - Data Sheets | Data Sheets | French |
| C15 - Data Sheets | Data Sheets | German |
| C15 - Data Sheets | Data Sheets | Italian |
| C15 - Data Sheets | Data Sheets | Chinese |
| C15 - Operating Manuals | Manual | English, Italian, French, Chinese, German |
Certificates and Approvals
| U10M, U10S, U10F,U15, C10, C15 - EU Declaration of Conformity | Declaration of Conformity | English |
| C15 capacity 2.5kN-50 kN - CAD | CAD Step Files |
| C15 capacity 100kN-250 kN - CAD | CAD Step Files |
| C15 capacity 500 kN - CAD | CAD Step Files |
| C15 capacity 1 MN - CAD | CAD Step Files |
| Maximum capacity (nominal load) | 2.5 kN, 5 kN, 10 kN, 25 kN, 50 kN, 100 kN, 250 kN, 500 kN, 1 MN |
| Maximum capacity (nominal load) | 562 lbf, 1.12 klbf, 2.25 klbf, 5.62 klbf, 11.2 klbf, 22.5 klbf, 56.2 klbf, 112 klbf, 225 klbf |
| Tensile / compression | Compression |
| Type/technology | Strain Gauge |
| Calibration | Fulfills ISO 376 |
| Output signal | mV/V (passive strain gauge) |
| Degree of protection | IP67 |
| Mechanical interfaces | Spherical load introduction |
| Height (without accessories) | 64.3 mm, 92 mm, 116 mm, 160.9 mm |
| Height (without accessories) | 2.53 in, 3.62 in, 4.57 in, 6.33 in |
| Diameter (without cable or plug) | 104.8 mm, 153.9 mm, 203.2 mm, 279 mm |
| Diameter (without cable or plug) | 4.13 in, 6.06 in, 8 in, 10.98 in |
자세한 정보는 데이터 시트를 참조하십시오.
기준 변환기 U15와 정밀 측정 앰프 모듈 QuantumX MX238B 의 조합은 매우 비용 효율적인 정밀 측정 체인을 생성합니다. QuantumX 모듈의 모듈식 설계 덕분에 온도, 전압, 회전 각도와 같은 추가 측정 변수를 통해 이 측정 체인을 쉽게 확장할 수 있습니다.