TU(T 로제트)

U 시리즈의 T 로제트형 변형률 게이지로, 두 방향의 변형(90° 시프트)을 측정하는 두 개의 측정 그리드가 장착되어 있습니다. 일반적으로 2개의 계측기를 연결하여 휫스톤 브리지 회로를 구성함으로써 인장력/압축력을 측정합니다

미니 사이즈 디자인을 포함한 다양한 사이즈가 준비되어 있습니다.
알루미늄 또는 강철에 최적화된 온도 응답.
최대 5,000 옴의 저항.

TU(T 로제트)

expand_more

chevron_left

chevron_right

U 시리즈 트랜스듀서 변형률 게이지: 감도 향상 및 탄성 계수 보정

MODCO(탄성 계수 보정) 측정 그리드 포일과 고성능 개질 PEEK 캐리어 소재를 결합함으로써, 취급이 간편하면서도 높은 정확도와 뛰어난 습도 특성을 겸비한 변형률 게이지를 구현합니다. U 시리즈 변형률 게이지 또한 탄성 계수 보정, 향상된 감도, 그리고 고변형률 조건에서 강화된 피로 강도를 제공합니다.

U 시리즈는 다양한 형상, 저항값 및 그리드 길이로 표준 제공됩니다. 맞춤형 디자인은 불과 몇 주 만에 제작할 수 있습니다.

견고한

뛰어난 내화학성
수분 흡수율이 매우 낮고 습기에 강함
곡률 반경이 작아 작은 드릴 구멍에도 설치할 수 있습니다

설치 시 취급이 간편하며 수명이 깁니다.

정밀

강성(탄성 계수)이 매우 높아, 측정체의 변형을 측정 그리드에 직접 전달할 수 있습니다
폴리이미드보다 높은 열전도율

높은 정밀도가 요구되는 변환기에 적합합니다.

유연한

강철 또는 알루미늄용 30종 이상의 표준 모델과 10가지 크리프 조정 기능
캡슐화, 접착제 사전 코팅, 솔더 탭 사전 도금 등 다양한 옵션을 제공합니다
맞춤 제작 가능

표준 솔루션이든 맞춤형 솔루션이든 상관없이 귀사의 솔루션에 완벽하게 부합합니다.

Filter

Temperature response keyboard_arrow_down
Mounting keyboard_arrow_down
Measuring grid width keyboard_arrow_down
Measuring grid width keyboard_arrow_down
Nominal resistance keyboard_arrow_down
Connection configuration keyboard_arrow_down
Measuring grid length keyboard_arrow_down
Measuring grid length keyboard_arrow_down
Carrier length keyboard_arrow_down
Carrier length keyboard_arrow_down
Carrier width keyboard_arrow_down
Carrier width keyboard_arrow_down

Code	Measuring grid length	Measuring grid length	Measuring grid width	Measuring grid width	Carrier length	Carrier length	Carrier width	Carrier width	Nominal resistance	Temperature response	Connection configuration	Mounting
1-TU21K1.6/1K0_E	1.6 mm, 2.5 mm	0.063 in, 0.098 in	3.1 mm, 1.8 mm	0.122 in, 0.071 in	6.6 mm	0.26 in	5.8 mm	0.228 in	1000 Ohms	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F)	Integrated solder tabs	Bondable
1-TU21K1.6/5K0_E	1.6 mm, 2.5 mm	1.6 in, 2.5 in	3.1 mm, 1.8 mm	0.122 in, 0.071 in	6.6 mm	0.26 in	5.8 mm	0.228 in	5000 Ohms	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F)	Integrated solder tabs	Bondable
1-TU21K3/5K0_E	3 mm	0.118 in	3 mm, 3.8 mm	0.118 in, 0.15 in	7.5 mm	0.295 in	9.1 mm	0.358 in	5000 Ohms	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F)	Integrated solder tabs	Bondable
1-TU21K3/350_E	3 mm	0.118 in	3 mm, 3.8 mm	0.118 in, 0.15 in	7.5 mm	0.295 in	9.1 mm	0.358 in	350 Ohms	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F)	Integrated solder tabs	Bondable
1-TU21S1.6/1K0_E	1.6 mm, 2.5 mm	0.063 in, 0.098 in	3.1 mm, 1.8 mm	0.122 in, 0.071 in	6.6 mm	0.26 in	5.8 mm	0.228 in	1000 Ohms	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F)	Integrated solder tabs	Bondable
1-TU31S5.1/1K0_E	1.3 mm, 5.1 mm	0.051 in, 0.2 in	5.1 mm, 2.5 mm	0.201 in, 0.098 in	9.7 mm	0.382 in	8.4 mm	0.311 in	1000 Ohms	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F)	Integrated solder tabs	Bondable
K-TU21K1.6/1K0BE	1.6 mm, 2.5 mm	0.063 in, 0.098 in	3.1 mm, 1.8 mm	0.122 in, 0.071 in	6.6 mm	0.26 in	5.8 mm	0.228 in	1000 Ohms	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F)	Integrated solder tabs	Bondable (adhesive pre-applied)
K-TU21K1.6/1K0LE	1.6 mm, 2.5 mm	0.063 in, 0.098 in	3.1 mm, 1.8 mm	0.122 in, 0.071 in	6.6 mm	0.26 in	5.8 mm	0.228 in	1000 Ohms	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F)	Integrated solder tabs	Bondable
K-TU23K1.6/1K0BE	1.6 mm, 2.5 mm	0.063 in, 0.098 in	3.1 mm, 1.8 mm	0.122 in, 0.071 in	6.6 mm	0.26 in	5.8 mm	0.228 in	1000 Ohms	Aluminium (23 ppm/K; 12.8 ppm/°F)	Integrated solder tabs	Bondable (adhesive pre-applied)
K-TU23K1.6/1K0LE	1.6 mm, 2.5 mm	0.063 in, 0.098 in	3.1 mm, 1.8 mm	0.122 in, 0.071 in	6.6 mm	0.26 in	5.8 mm	0.228 in	1000 Ohms	Aluminium (23 ppm/K; 12.8 ppm/°F)	Integrated solder tabs	Bondable
K-TU23K1.6/1K0_E	1.6 mm, 2.5 mm	0.063 in, 0.098 in	3.1 mm, 1.8 mm	0.122 in, 0.071 in	6.6 mm	0.26 in	5.8 mm	0.228 in	1000 Ohms	Aluminium (23 ppm/K; 12.8 ppm/°F)	Integrated solder tabs	Bondable
K-TU23K1.6/5K0_E	1.6 mm, 2.5 mm	0.063 in, 0.098 in	3.1 mm, 1.8 mm	0.122 in, 0.071 in	6.6 mm	0.26 in	5.8 mm	0.228 in	5000 Ohms	Aluminium (23 ppm/K; 12.8 ppm/°F)	Solder tabs with strain relief	Bondable
K-TU31K5.1/1K0BE	1.3 mm, 5.1 mm	0.051 in, 0.2 in	5.1 mm, 2.5 mm	0.201 in, 0.098 in	9.7 mm	0.382 in	8.4 mm	0.311 in	1000 Ohms	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F)	Integrated solder tabs	Bondable (adhesive pre-applied)
K-TU31K5.1/1K0LE	1.3 mm, 5.1 mm	0.051 in, 0.2 in	5.1 mm, 2.5 mm	0.201 in, 0.098 in	9.7 mm	0.382 in	8.4 mm	0.311 in	1000 Ohms	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F)	Integrated solder tabs	Bondable
K-TU31K5.1/1K0_E	1.3 mm, 5.1 mm	0.051 in, 0.2 in	5.1 mm, 2.5 mm	0.201 in, 0.098 in	9.7 mm	0.382 in	8.4 mm	0.311 in	1000 Ohms	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F)	Integrated solder tabs	Bondable
K-TU33K5.1/1K0BE	1.3 mm, 5.1 mm	0.051 in, 0.2 in	5.1 mm, 2.5 mm	0.201 in, 0.098 in	9.7 mm	0.382 in	8.4 mm	0.311 in	1000 Ohms	Aluminium (23 ppm/K; 12.8 ppm/°F)	Integrated solder tabs	Bondable (adhesive pre-applied)
K-TU33K5.1/1K0LE	1.3 mm, 5.1 mm	0.051 in, 0.2 in	5.1 mm, 2.5 mm	0.201 in, 0.098 in	9.7 mm	0.382 in	8.4 mm	0.311 in	1000 Ohms	Aluminium (23 ppm/K; 12.8 ppm/°F)	Integrated solder tabs	Bondable
K-TU33K5.1/1K0_E	1.3 mm, 5.1 mm	0.051 in, 0.2 in	5.1 mm, 2.5 mm	0.201 in, 0.098 in	9.7 mm	0.382 in	8.4 mm	0.311 in	1000 Ohms	Aluminium (23 ppm/K; 12.8 ppm/°F)	Integrated solder tabs	Bondable

Document	Type	Language
U Series (for OEM) - データシート	데이터 시트	English
U Series (for OEM) - データシート	데이터 시트	German

Certificates and Approvals

Document	Type	Language
Strain Gauges - 適合宣言	Declaration of Conformity	English

TU (T Rosettes)
Property	Value
Type/technology	Foil strain gauge
Application	Manufacturing transducers
Geometry	T rosette
Measuring grid length	1.6 mm, 2.5 mm, 3 mm, 1.3 mm, 5.1 mm
Measuring grid length	0.063 in, 0.098 in, 0.118 in, 0.051 in, 0.2 in, 1.6 in, 2.5 in
Measuring grid width	3.1 mm, 1.8 mm, 3 mm, 3.8 mm, 5.1 mm, 2.5 mm
Measuring grid width	0.122 in, 0.071 in, 0.118 in, 0.15 in, 0.201 in, 0.098 in
Carrier length	6.6 mm, 7.5 mm, 9.7 mm
Carrier length	0.26 in, 0.295 in, 0.382 in
Carrier width	5.8 mm, 9.1 mm, 8.4 mm
Carrier width	0.228 in, 0.358 in, 0.311 in
Temperature range	Standard (up to 200°C)
Nominal resistance	1000 Ohms, 350 Ohms, 5000 Ohms
Gauge factor (measuring grid material)	Cr-Ni alloy (ca. 2.2)
Temperature response	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F), Aluminium (23 ppm/K; 12.8 ppm/°F)
Maximum elongation	Standard
Fatigue life	Standard
Connection configuration	Integrated solder tabs, Solder tabs with strain relief
Mounting	Bondable, Bondable (adhesive pre-applied)
Grid protection	Covered

List of accessories available for all variants of this family

Product Code	Description
1-EP310N	Hot curing 2-comp. adhesive EP310N
1-P250	1-comp. adhesive P250 - 2 x 15 g
1-NG120	Nitrile rubber NG120
1-RMS1-300	RMS1 solvent mixture 300 ml
K-KAB-ML	Measurement cable by the meter

TU(T 로제트)

견고한

정밀

유연한

Filter

${referer}를 www.hbkworld.com로 이동했습니다.