PACEline CLP

PACEline CLP piezoelectric force washers fit virtually anywhere due to their minimal height of typically 4 mm.

PACEline CLP

expand_more

chevron_left

chevron_right

PACEline CLP Piezoelectric Subminiature Load Washer: Capacities From 3 kN to 80 kN

PACEline CLP piezoelectric load washers have a very low height of 3 to 5 mm. The sensors enable force to be measured at locations where standard force sensors cannot be installed. The sensors have an integrated cable (either 0.5 or 1 m long) and are a cost-effective way to allow for piezoelectric measurements to be taken.

By combining CLP load washers with different mounting directions of at least two CSW load washers, very small measurement systems can be set up to measure forces in different directions simultaneously.

Capacities: 3 kN to 80 kN
HBK accuracy class: 1

Fit for all standard screw connections ranging from M2.5 to M14

The piezoelectric miniature force washers of the PACEline CLP series are now available in three new capacities (3 kN, 14 kN, and 36 kN). This means for you that PACEline CLP is now available for all industry-standard screw connections ranging from M2.5 to M14. The tiny force sensors can be installed in very small setups, without the need to resize or adapt the screw or bolt connections.

Minimal space required

3 mm (CLP/3KN) to 5 mm (CLP/80 KN) height
12 mm and 36 mm outside diameter
Also for use under difficult EMC conditions
Robust due to stainless steel materials and IP65 degree of protection (i.a. through integrated cable with different lengths)

Absolutely reliable force measurement, even where space is a constraint.

Dynamic and wide measurement range

Fundamental frequencies in the kHz range due to extremely stiff design
All sensors of the CLP family have the same sensitivity
Low drift and high quality
The output signal depends only on the type of installation and the force applied.

ONE sensor for a huge measurement range - from a few Newtons to several kilo-Newtons.

Well-thought-through accessories

Industry tried and tested charge amplifiers - even with higher IP65 degree of protection
Summing boxes and amplifiers are galvanically isolated from the test object to which they are installed
Wide choice of low-noise cables and extension adapters, available in practical lengths and with plugs suitable for the charge amplifier

Perfect accessories allow for fast installation of your measurement system. No additional insulation washers required for installation (due to galvanic isolation)

Code	Maximum capacity (nominal load)	Maximum capacity (nominal load)	Height (without accessories)	Height (without accessories)	Diameter (without cable or plug)	Diameter (without cable or plug)
1-CLP/3KN	3 kN	674 lbf	3 mm	0.118 in	4.05 mm	0.1594485 in
1-CLP/3KN-0.5M	3 kN	674 lbf	3 mm	0.118 in	4.05 mm	0.1594485 in
1-CLP/7KN	7 kN	15.7 klbf	3 mm	0.118 in	5.5 mm	0.216535 in
1-CLP/7KN-0.5M	7 kN	1.57 klbf	3 mm	0.118 in	5.5 mm	0.216535 in
1-CLP/14KN	14 kN	3.15 klbf	3.5 mm	0.138 in	7.8 mm	0.307086 in
1-CLP/14KN-0.5M	14 kN	3.15 klbf	3.5 mm	0.138 in	7.8 mm	0.307086 in
1-CLP/26KN	26 kN	5.85 klbf	3.5 mm	0.138 in	9.8 mm	0.385826 in
1-CLP/26KN-0.5M	26 kN	5.85 klbf	3.5 mm	0.138 in	9.8 mm	0.385826 in
1-CLP/36KN	36 kN	89 klbf	3.5 mm	0.138 in	11.8 mm	0.464566 in
1-CLP/36KN-0.5M	36 kN	89 klbf	3.5 mm	0.138 in	11.8 mm	0.464566 in
1-CLP/62KN	62 kN	13.9 klbf	4 mm	0.157 in	13.8 mm	0.543306 in
1-CLP/62KN-0.5M	62 kN	13.9 klbf	4 mm	0.157 in	13.8 mm	0.543306 in
1-CLP/80KN	80 kN	18 klbf	5 mm	0.197 in	15.8 mm	0.622046 in
1-CLP/80KN-0.5M	80 kN	18 klbf	5 mm	0.197 in	15.8 mm	0.622046 in

PACEline CLP - Data Sheet	Data Sheets	English
CLP - Data Sheets	Data Sheets	French
CLP - Data Sheets	Data Sheets	German
CLP - Data Sheets	Data Sheets	Italian
CLP - Data Sheets	Data Sheets	Japanese
CLP - Mounting Instructions	Mounting Instructions	English, Italian, French, German

Certificates and Approvals

CFT/CFT+/CFW/CLP/CSW/CST/CHW - EU Declaration of Conformity

Declaration of Conformity

English

PACEline CLP capacity 3 kN - CAD	CAD Step Files
PACEline CLP capacity 7 kN - CAD	CAD Step Files
PACEline CLP capacity 14 kN - CAD	CAD Step Files
PACEline CLP capacity 26 kN - CAD	CAD Step Files
PACEline CLP capacity 36 kN - CAD	CAD Step Files
PACEline CLP capacity 62 kN - CAD	CAD Step Files
PACEline CLP capacity 80 kN - CAD	CAD Step Files

PACEline CLP
Maximum capacity (nominal load)	26 kN, 7 kN, 3 kN, 62 kN, 80 kN, 36 kN, 14 kN
Maximum capacity (nominal load)	5.85 klbf, 15.7 klbf, 674 lbf, 13.9 klbf, 18 klbf, 1.57 klbf, 89 klbf, 3.15 klbf
Tensile / compression	Compression
Type/technology	Piezoelectric
Calibration	Not calibrated
Output signal	pC (passive piezoelectric)
HBK Accuracy class	1
Load cell design	Miniature sensor
Degree of protection	IP65
Mechanical adaptation	Force washer
Height (without accessories)	3.5 mm, 3 mm, 4 mm, 5 mm
Height (without accessories)	0.138 in, 0.118 in, 0.157 in, 0.197 in
Diameter (without cable or plug)	9.8 mm, 5.5 mm, 4.05 mm, 13.8 mm, 15.8 mm, 11.8 mm, 7.8 mm
Diameter (without cable or plug)	0.385826 in, 0.216535 in, 0.1594485 in, 0.543306 in, 0.622046 in, 0.464566 in, 0.307086 in

다양한 종류의 액세서리

다양한 케이블
센서를 병렬로 연결하기 위한 합성 박스
편리한 설치를 위한 프리스트레싱 세트
케이블 연장용 커플링

PACEline CLP 센서의 측정 방향. 하중 세척기는 파란색 화살표 방향(Fx)으로 측정합니다. 수평 방향의 힘(전단력 측정)을 측정하려면 HBM의 PACEline CSW 하중 와셔 사용을 권장합니다.

${referer}를 www.hbkworld.com로 이동했습니다.

이를 통해 HBM, Brüel & Kjær, nCode, ReliaSoft, Discom 브랜드가 하나로 통합되어 더 깨끗하고 건강하며 생산적인 세상을 위해 더 빠르게 혁신할 수 있도록 지원합니다.

${referer}를 www.hbkworld.com로 이동했습니다.

이를 통해 HBM, Brüel & Kjær, nCode, ReliaSoft, MicroStrain 및 Discom 브랜드가 통합되어 더 깨끗하고 건강하며 생산적인 세상을 위해 더 빠르게 혁신할 수 있도록 지원합니다.

Main Menu

Main Menu

Main Menu

Main Menu

Main Menu

Main Menu

Main Menu

Main Menu

PACEline CLP

PACEline CLP Piezoelectric Subminiature Load Washer: Capacities From 3 kN to 80 kN

Fit for all standard screw connections ranging from M2.5 to M14

Minimal space required

Dynamic and wide measurement range

Well-thought-through accessories

다양한 종류의 액세서리

관련 제품

PACEline CFW | 제품 | HBK

KMRPlus| 제품 | HBK

PACEline CFW | 제품 | HBK

디지박스 인더스트리얼

${referer}를 www.hbkworld.com로 이동했습니다.

${referer}를 www.hbkworld.com로 이동했습니다.

${referer}를 www.hbkworld.com로 이동했습니다.

${referer}를 www.hbkworld.com로 이동했습니다.

${referer}를 www.hbkworld.com로 이동했습니다.

${referer}를 www.hbkworld.com로 이동했습니다.