The CFT miniature piezoelctric force transducers are pre-stressed and calibrated. For compressive forces up to 20 kN.
PACEline CFT
The CFT piezoelectric force transducers are pre-stressed and calibrated. One special feature of the sensors is that gallium phosphate is used as the sensor material, Enabling the achievement of twice the sensitivity, compared with conventional piezoelectric force transducers that use quartz.
The extremely small sensors are completely manufactured from stainless steel materials and offer the advantages that are typical to the piezoelectric principle: They allow measuring forces of a few Newtons, also under a high initial load, as well as measuring very fast force variations. The force transducers have displacements of only a few µm.
High measuring dynamics and reliable results even under adverse conditions
Reliable application due to a well-conceived design and tested accessories from HBK
Reliable measurement of minimal forces while providing a wide measuring range
| PACEline CFT - Data Sheet | Data Sheets | English |
| CFT - Data Sheets | Data Sheets | German |
| CFT - Data Sheets | Data Sheets | Chinese |
| CFT - Data Sheets | Data Sheets | Italian |
| CFT - Data Sheets | Data Sheets | French |
| CFT - Mounting Instructions | Mounting Instructions | English, Italian, French, Chinese, German |
Certificates and Approvals
| CFT/CFT+/CFW/CLP/CSW/CST/CHW - EU Declaration of Conformity | Declaration of Conformity | English |
| PACEline CFT & CMC capacity 5kN - CAD | CAD Step Files |
| PACEline CFT & CMC capacity 20kN - CAD | CAD Step Files |
| Maximum capacity (nominal load) | 20 kN, 5 kN |
| Maximum capacity (nominal load) | 4.5 klbf, 1.12 klbf |
| Tensile / compression | Compression |
| Type/technology | Piezoelectric |
| Calibration | Calibrated |
| Output signal | pC (passive piezoelectric) |
| Degree of protection | IP65 |
| Mechanical interfaces | Both sides central internal thread |
| Height (without accessories) | 14 mm, 10 mm |
| Height (without accessories) | 0.551 in, 0.394 in |
| Diameter (without cable or plug) | 19 mm, 13 mm |
| Diameter (without cable or plug) | 0.75 in, 0.512 in |
List of accessories available for all variants of this family
U93A is suitable for very fast force signals, so that you can use it for experimental tasks, even for highly dynamic tests.
Easy to mount due to flanges on both sides, IP68 rated.
NEW: Available as cost-effective digital sensor with IO-Link interface. Configure your U93A here.
The CFW force sensors come along with market standard dimensions, rust free and robust quality and have minimal linearity errors.
The CFW force sensors come along with market standard dimensions, rust free and robust quality and have minimal linearity errors.
1-CCO
1-KAB143-0.5
1-KAB145-0.2
1-KAB145-3
1-KAB176-1
1-CSB4/1