MAIN MENU

WA-T

Displacement transducers of the WA-T series in the probe version feature impressively reliable and highly accurate measurement results. They have already been tried and tested a thousand times over in the most diverse applications.

img

WA-T

expand_more
chevron_left
chevron_right

WA-T: Inductive Displacement Measurements in a Compact Design; Nominal (Rated) Measuring Range up to 100 mm

The technologically sophisticated and proven displacement transducers of the WA-T series in the probe version feature an incredibly short design (in comparison to the measuring range). The compact dimensions of the sensor have been possible through the utilization of an active quarter bridge circuit based on the differential inductor principle. The bridge is also directly integrated in the sensor to create a full bridge circuit for easy connection of the WA-T transducer to the measuring amplifier.

Insensitive to dirt, the WA-T displacement transducers feature rugged mechanics and exhibit significantly stable temperature behavior. This means they can be applied in almost every area of the industry and generate outstanding results in displacement measurements.

Stable and rugged

  • Ruggedized mechanical construction
  • Insensitive to dirt
  • Equipment protection level up to IP67 depending on the version
  • High resistance to shock and vibrations per DIN EN 60068
  • Typical service life is more than 10,000,000 cycles
  • The carrier frequency is 4.8 kHz, which is insensitive to electrical interference.

Reliable and worry-free measurements over a long period, without any appreciable wear and tear

Numerous variants

  • Available in 5 different measurement ranges, 0…2 mm, 0…10 mm, 0…20 mm, 0…50 mm, 0…100 mm
  • 6 different cable/plug types configurable on the transducer
  • There is Also also an choice option of between free ends or 3 different plugs for connecting to the amplifier or electronics
  • A high-temperature version (up to +150° C) and a low-temperature version (to -–40° C) are also available
  • 0.1 % or 0.2 % non-linearity (can be selected for many types)
  • The electronics can be optionally integrated for output signal in V instead of mV/V
  • Altogether, there are more than 5000 different combinations that are possible.

One displacement transducer, ideally adapted to your individual application due to numerous options and configurations.

Filter

close
  • Measurement range keyboard_arrow_down
  • Measurement range keyboard_arrow_down
  • Length keyboard_arrow_down
  • Length keyboard_arrow_down
Clear All
Apply Filters
Filter tune
Language keyboard_arrow_down
WA - Data Sheet Data Sheets English
WA-T - Data Sheet Data Sheets English
WA - Data Sheets Data Sheets German
WA - Data Sheets Data Sheets French
WA - Data Sheets Data Sheets Italian
WA-T - Datenblatt Data Sheets German
WA-T- Caractéristiques techniques Data Sheets French
WA-T - Prospetto dati Data Sheets Italian
WA-T - 數據表 Data Sheets Chinese
WA-T - Quick Start Guide Quick Start Guide English, Italian, French, Chinese, German
WA - Mounting Instructions Mounting Instructions English, Italian, French, German
WA-T - Mounting Instructions Mounting Instructions English, Italian, French, Chinese, German

Certificates and Approvals

WA - EU Declaration of Conformity Declaration of Conformity English
WA-T/0...2 mm - CAD CAD Step Files
WA-T/0...10 mm - CAD CAD Step Files
WA-T/0...20 mm - CAD CAD Step Files
WA-T/0...50 mm - CAD CAD Step Files
WA-T/0...100 mm - CAD CAD Step Files
WA-T
Type/technology Inductive
Application Multi purpose
Measurement range 10 mm, 50 mm, 100 mm, 2 mm, 20 mm
Measurement range 0.394 in, 1.97 in, 3.94 in, 0.079 in, 0.787 in
Degree of protection IP67
Output signal Passive
Mechanical connection Probe
Linearity deviation 0.2 %
Shaft diameter 12 mm
Shaft diameter 0.472 in
Length 159 mm, 299 mm, 491.6 mm, 209 mm
Length 6.26 in, 11.8 in, 194 in, 8.23 in

List of accessories available for all variants of this family

Product Code Description
Displacement transducer WA mounting kit 1-WS/ZB12 Displacement transducer WA mounting kit
Measuring Insert M 2/70H DIN878 3-6061.0003 Measuring Insert M 2/70H DIN878