변형률
변형률 게이지(변형계)는 더 우수하고 안전한 제품을 만들기 위해 재료의 피로도를 측정하고 시험하는 데 있어 핵심적인 도구입니다. 구조적 내구성 테스트,구조 상태 모니터링, 또는 OEM 트랜스듀서 생산을 위해, HBK의 광학 및 전기 스트레인 게이지를 첫 번째로 선택해야합니다.
September 09, 2009. A new world record - this is what everything is about in the bay of Hyères in Southern France. The trimaran "Hydroptère" is speeding over the Mediterranean sea. The airflow hitting the crew on board at wind force 7 is so strong that spray is stirred up feeling like slaps in their faces. Forces of nature pull at every part of the ship. However, the record is achieved: Hydroptère reaches a speed of 51.35 knots (about 95 km/h) and is thus considered the fastest sailing boat in the world for the distances of 500 and 1000 m. This success was made possible by one man's ideas. Alain Thébault of France has been pursuing his dream of building the fastest sailing boat in the world for decades - a ship that moves so fast that it flies over the water. To make this dream a reality, Thébault has consistently relied on leading-edge technologies.
The developers of Hydroptère virtually reinvented ship building. Highly innovative materials, optimized design and many tests: Every component used in Hydroptère has been tested to achieve the objective - the world record. Here are a few examples:
When bordering on the very limits of feasibility, using professional and powerful test and measurement equipment is a must.
The Hydroptère team therefore deliberately decided to use HBK's QuantumX measurement data acquisition system. Reliability, precision, quality: QuantumX is outstanding for these values - they are also crucial to Hydroptère's success. The high quality of measurement data therefore has significantly contributed to the further optimization of stability, speed, cavitation, aerodynamic drag, vibration and oscillation as well as the strength of the material used. Hydroptère is among the first users worldwide to rely on the new CX22W data recorder from the QuantumX family. The device - featuring WLAN connection and touch-screen operation - is installed in the middle section of the boat and continuously saves measurement data acquired at different locations in the boat. Damien COLEGRAVE, responsible for the test and measurement equipment on board: "We have been involved in the development of CX22W from the start and HBK has incorporated our feedback point by point. The idea of an "embedded PC" combining the benefits of the Windows world with the reliability of a rugged data logger has proven successful." In addition, the measurement data acquisition system has been integrated into the mobile radio network. Data can easily be accessed from the office via a web browser for real-time analysis of trial runs. Optical and acoustic signals alert the responsible engineer as soon as critical load limits are exceeded - to facilitate a speedy and appropriate response. Extensive analyses of the recorded measurement data are performed after each test. They enable conclusions to be drawn on the boat's response to swell, wind direction or positioning of the sails. The results are included in the computer simulation of the trimaran to simulate extreme conditions and further refine the mathematical model. This results in better prediction of the boat's most likely behavior.
Hydroptère uses the QuantumX amplifier system and, in addition, strain gages from HBK. The strain gages installed by HBK withstand high speed, sea water and vibration. Using the complete measuring chain from HBK involved many benefits, explains Damien Colegrave: "Only by combining strain gages and precise data acquisition did we succeed in optimizing the boat's critical components. No experimental data had been available for such a prototype so far. Therefore, we have opted for a highly reliable measurement system and hence for HBK." The Hydroptère dream goes on. New records, new goals are in sight. Alain Thébault intends to sail round the world in 40 days with an even huger hydrofoil trimaran. What seemed impossible in the past has come within reach - not at least thanks to the results of leading-edge measurement technology. "HBK has become part of the team, striving to make my dream come true and to build the fastest sailing boat of all times," Alain Thébault sums up.
변형률 게이지(변형계)는 더 우수하고 안전한 제품을 만들기 위해 재료의 피로도를 측정하고 시험하는 데 있어 핵심적인 도구입니다. 구조적 내구성 테스트,구조 상태 모니터링, 또는 OEM 트랜스듀서 생산을 위해, HBK의 광학 및 전기 스트레인 게이지를 첫 번째로 선택해야합니다.
QuantumX 데이터 수집 시스템(DAQ)은 모든 테스트 및 측정 요구 사항을 충족하는 완벽한 도구입니다. 다양한 물리량 및 센서 기술의 신뢰할 수 있는 데이터 수집을 위해 QuantumX가 선호되는 선택입니다. 모든 신호 및 센서 정보를 수집할 수 있는 고유한 기능이 있습니다.