MGCplus
교정, 재료 또는 피로 테스트 여부에 관계없이 MGCplus 데이터 수집 시스템은 모든 종류의 애플리케이션에서 사용됩니다. 변형, 힘, 변위, 토크, 전압, 전류, 온도 및 기타 많은 매개변수에 대한 데이터를 수집합니다. 이러한 다재다능성 덕분에 MGCplus는 전 세계에서 가장 인기 있는 데이터 수집 시스템 중 하나입니다.
A major project being run by the EAFIT University – Colombian Institute for the Development of Science and Technology (Colciencias) and the Medellín Metro analyzed the dynamic response of the passenger cars.
The two organizations needed to examine the operating conditions of the metro in Medellín to ensure it conformed with international railroad standard UIC- 518. This contains all the details for testing the ride performance of rolling stock from their dynamic response, in order to assess safety, track stress and ride conditions (stability, comfort, etc.).
Position and mounting of the force and acceleration transducers HBK‘s U2B/100 force transducers were selected for mounting on the car axles of the train. The B12/500 acceleration transducers from HBK were installed in the bogie and in the passenger compartment in the vertical and transverse directions.
The MGCplus data acquisition system was used for signal conditioning, together with HBK catman® software. This allowed the measurement results to be read off directly and prepared for further processing by programs such as MATLAB®.
The speed of the metro was logged by MGCplus and the time was recorded internally. A total of 3.5 million measured values were logged and managed, at a sampling rate of 400 measured values/s per channel. This means that at a maximum speed of 80 km/h, data is logged after only traveling about 55 mm.
Once the tests were completed, HBK‘s equipment proved that all the analyzed units satisfactorily met the UIC-518 railroad standard.
A UNIVERSITY ATTUNED TO THE LOCAL AND GLOBAL AGENDA Founded in 1960 and the first university in Antioquia to obtain High Quality Accreditation from the National Education Ministry, Universidad EAFIT is an institution that is convinced that academic excellence, the strengthening of faculty teaching and research efforts, and an improved national and international presence are key pillars for impacting communities
교정, 재료 또는 피로 테스트 여부에 관계없이 MGCplus 데이터 수집 시스템은 모든 종류의 애플리케이션에서 사용됩니다. 변형, 힘, 변위, 토크, 전압, 전류, 온도 및 기타 많은 매개변수에 대한 데이터를 수집합니다. 이러한 다재다능성 덕분에 MGCplus는 전 세계에서 가장 인기 있는 데이터 수집 시스템 중 하나입니다.
변형률 게이지 또는 압전 기술을 적용한 HBK 힘 센서 및 힘 변환기는 변위가 거의 발생하지 않으면서 최대 20 MN의 정적과 동적 인장 및 압축 하중을 측정합니다.
현재 IO-Link, 4-20mA 또는 0-10V 출력을 지원하는 다양한 힘 센서가 출시되어 있습니다. 아래의 출력 신호 필터를 사용하여 IO-Link 또는 아날로그 증폭기 옵션을 확인하십시오.