1/4英寸麦克风前置放大器TYPE 2670
麦克风前置放大器TYPE 2670设计用于在广泛的温度、湿度和其他环境条件下工作。提供带有7针LEMO插头的一体式2M电缆。
TYPE 2670
前置放大器TYPE 2670非常紧凑,可在广泛的温度、湿度和其他环境条件下工作。
| Code | Name |
|---|---|
| -2670--PTO- | "1/4"" Microphone Preamplifier, integral |
| -2670-D-030- | 1/4" classic MicPreamp,7-p LEMO, 3mCable |
| -2670-W-003- | 1/4" short classic MicPreamp |
| -2670-W-012- | Short 2670 Pre-Amplifier, / 10,0 m A |
| Polarization | Classical |
| Lower frequency | 15 Hz |
| Higher frequency | 200 kHz |
| Diameter | 1/4 inch |
| Minimum Temperature | -20 °C |
| Maximum Temperature | 60 °C |
| Minimum Temperature | -4 °F |
| Maximum Temperature | 140 °F |
| Connector | Lemo 7-pin |
| Calibration facility | CIC |
The high distortion limit together with an extremely low inherent noise level gives a wide dynamic range. You can connect ¼" microphones directly and 1/8-inch types using an adaptor. The preamplifier, cable and its connectors all fulfil EMC requirements. You can verify the condition of the microphone, preamplifier and cable on-site using its patented charge injection calibration (CIC) technique.
The low output impedance and high output current capability mean that you can use long cables between the preamplifier and your measuring instrument without loss of signal quality.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.