arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

TYPE 2669

½-英寸麦克风前置放大器,录音机,含电缆,7针LEMO连接器

此½"麦克风置放大器可在广泛的温度、湿度和其他环境条件下工作。

img

TYPE 2669

expand_more
chevron_left
chevron_right

此½"麦克风置放大器可在广泛的温度、湿度和其他环境条件下工作。

Ul.
  • 使用HBK 1/2"(1"、1/4"和1/8"带适配器)和兼容麦克风进行声音测量
  • Brüel & Kjær测量仪器的通用前置放大器和高阻抗输入探头
  • Daten und Fakten - Falcon 1/2 Data Sheets German
    FAMILY 2669
    Polarization Classical
    Lower frequency 3 Hz
    Higher frequency 200 kHz
    Diameter 1/2 inch
    Minimum Temperature -20 °C, -60 °C
    Maximum Temperature 60 °C, 150 °C
    Minimum Temperature -4 °F, -76 °F
    Maximum Temperature 140 °F, 302 °F
    Connector Lemo 7-pin
    Calibration facility CIC

    Features

    • Compact LEMO connector at preamplifier: LEMO 0B 7-pin. 
    • Full electromagnetic compatibility (EMC)
    • Very low inherent noise, high input impedance
    • Low output impedance and high output current allows use with long extension cables

    The preamplifier has a very high input impedance presenting virtually no load to the microphone. The high output voltage together with an extremely low inherent noise level gives a wide dynamic range. You can connect ½" microphones directly and 1", ¼" and 1/8" types using adaptors.

    The preamplifier, cable and its connectors all fulfil EMC requirements. You can verify the condition of the microphone, preamplifier and cable on-site using its patented charge injection calibration technique.

    The low output impedance and high output current capability means that you can use long cables between the preamplifier and your measuring instrument without loss of signal quality. 

    Related Services