arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

GN8103B

GHS CARD, 8CH Volt, HighSpeed 25MS/s

HighSpeed Voltage input card, 8 channels; 25 MS/s, 14 bit, 8 GB RAM.
*** features ***
- single ended
- 1 MOhm or 50 Ohm impedance
- input range 1 MOhm: ± 10 mV to ± 100 V
- input range 50 Ohm: ± 10 mV to ± 5 V
- Bessel analog anti alias filter, with digital
Bessel and Butterworth down sampling filters
- 16 digital event and two counter / timer inputs
*** compatibility ***
tethered mainframes: GEN2tB, -3t, -4tB, -7tA, -17tA
mainframes with integrated PC: GEN3i, -3iA, -7i,
-7iA
***options (factory installed, order seperately)***
- real-time formula data base 1-GEN-OP-RT-FDB

img

GHS CARD, 8CH Volt, HighSpeed 25MS/s

expand_more
chevron_left
chevron_right

Input Cards for Ultra-Fast Mechanical and Electrical Signals: GN8103B

With 25 MS/s the high speed input card is suitable for the acquisition of ultra-fast, accurate and high resolution transient signals in high speed mechanical tests or electrical/electronic environments.

 

The GN8103B data acquisition (DAQ) input card offers eight channels each at a very high speed. With selectable anti-aliasing filtering, high bandwidth, and low-noise input amplifiers with 0.1% error, this card transforms the Genesis HighSpeed series into an extremely fast transient recorder – that too at a surprisingly low price per channel. It comes in the following version:

  • GN8103B: 14-bit resolution with a sample rate of 25 MS/s

The enhanced resolution mode increases the input resolution for all models to a 16-bit at lower speeds. The great memory capacity of 8 GByte per board enables capturing longer events, while the digital trigger feature ensures that the data is acquired as and when the event happens.

High Signal Fidelity

  • Error 0.1%
  • 14-bit resolution; dynamic  resolution increase
  • +/-10 mV to +/-100 V input range
  • 1 MOhm or 50 Ohm input

Reliable Acquisition

  • 8 channels for simultaneous acquisition
  • Digital triggers for each channel
  • Up to 200 triggers/s
  • Sample and trigger synchronization between cards and between mainframes (fiber-optical)

Powerful

  • Sweep-based acquisition or continuous streaming, even simultaneously
  • Sample rate switching on trigger
  • DSP for real time math (at a reduced speed)
  • Additional counter / timer channels and outputs
Language keyboard_arrow_down
Key attributes: DAQ Systems
Number of inputs 8
Input Electrical voltage
Output Static digital I/O
Accuracy class ---
Degree of protection IP20
Sample rate 25000 kHz
Housing Frame, Rack with PC
Real-time capabilities Calculation
Interface -