"Getting Started": Setting up a Force Measurement Chain from A to Z

Online Crash Course

How do I connect a force transducer to an amplifier? In our live crash course, HBM product managers Thomas Kleckers and Michael Guckes guide you through the process of setting up a measurement chain step-by-step.

The content of the course is tailored to the requirements of machine builders, automation companies, beginners who are looking for an introduction to force measurements and experts who want to freshen up their knowledge on the latest requirements for calibration intervals and product innovations.

Download the Powerpoint Presentation download

Together with you, we will discuss:

Benefits of the usage of TEDs sensors
How to select the right cables and accessories
Tips and tricks in setting up your amplifier
The different possibilities of force measurement chain calibrations

The course is free of charge and lasts roughly 45minutes. Please submit your questions prior the course by sending an email to [email protected] and we will answer them during the session.

All you need to participate is a head set, an hour of your time, and lots of questions. The session will be conducted via WebEx. After the registration, you will receive an email confirmation with a link to the online session.

Together with you, we will discuss:

Benefits of the usage of TEDs sensors
How to select the right cables and accessories
Tips and tricks in setting up your amplifier
The different possibilities of force measurement chain calibrations

The course is free of charge and lasts roughly 45minutes. Please submit your questions prior the course by sending an email to [email protected] and we will answer them during the session.

Your Course Instructors and Point of Contact

Thomas Kleckers, Product Manager for Force Transducers at HBM

Thomas has over 20 years of experience in force measurements and is an expert in the field of calibrations.

[email protected]

Michael Guckes, Product Manager for Signal Conditioners and Amplifiers at HBM

Michael is responsible for the signal conditioner and amplifier portfolio at HBM. His domain expertise lies in the field of IIoT, industrial measurement chains, and software.

[email protected]

A Typical Force Measurement Chain

With HBM's wide selection of force sensors, you will find the right component for your application. We recommend using ClipX, the precise single channel signal conditioner for a quick and easy set up of your measurement chain. ClipX comes with TEDS and a self-explanatory browser interface so you can start your measurement control within five minutes of the initial set up.

We haved moved ${referer} to www.hbkworld.com

This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.

We haved moved ${referer} to www.hbkworld.com

This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.

We haved moved ${referer} to www.hbkworld.com

This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.

We haved moved ${referer} to www.hbkworld.com

This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.

Main Menu

Main Menu

Main Menu

Main Menu

"Getting Started": Setting up a Force Measurement Chain from A to Z

Online Crash Course

Together with you, we will discuss:

Together with you, we will discuss:

Your Course Instructors and Point of Contact

A Typical Force Measurement Chain

Further Reading

Three Ways to Optimize Your Production with IOT

We haved moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com