MX440B

QuantumX Universalmessverstärker (4)

4-Kanal Universalmessverstärker der QuantumX-Familie;
Unterstützung der folgenden Aufnehmertechnologien:
- DMS Voll- oder Halbbrücke (DC oder TF mit 4,8 kHz);
- IEPE (CCLD, ICP);
- Piezo-resistive Vollbrücke;
- Widerstandsthermometer: PT100, PT1000;
- Thermoelemente Typ K, N, R, S, T, B, E, J;
- Ohmscher Widerstand: 5000 Ohm;
- Potentiometrische Aufnehmer;
- Induktive Voll- oder Halbbrücke;
- LVDT;
- Spannung (100 mV, 10 V oder 60 V);
- Strom: 20 mA;
- Digitaler Pulszähler, Drehgeber, Frequenz, SSI;
Für jeden Messkanal gilt:
- Messrate: max. 40 kS/s;
- Galvanisch getrennte Kanäle;
- Digitales Tiefpass-Filter: Bessel, Butterworth;
- TEDS-Unterstützung: automatische Sensorerkennung;
- Sensorversorgung: 5...24 V, 0,7 W (Modul: 2 W);
- Buchse: DSubHD-15;
Allgemeines:
- 1 x Ethernet (PTP);
- 2 x FireWire;
- Spannungsversorgung: 10...30 V DC, max. 10 W;
- Werkskalibrierdaten nach DIN/ISO 10012 auf dem
Gerät gespeichert (Zertifikat generieren via MX
Assistent)
Optionales Zubehör:
- AC/DC Netzteil 24 V / 30 W: 1-NTX001;
- Anschluss von Thermoelementen: 1-SCM-TCK/J/T/E;
- DMS-Viertelbrücken: 1-SCM-SG120/350/1000;
- Anschluss von 300 V CAT II: 1-SCM-HV;
- Anschluss von IEPE oder 10 V über BNC:
1-SUBHD15-BNC.

expand_more

chevron_left

Überblick
Dokumente
Downloads
Specifications
Accessories

chevron_right

QuantumX MX840B and MX440B: 24-Bit Universal Measuring Amplifier for All Common Sensor Technologies

The MX840B and MX440B modules are the universal measuring amplifiers of the QuantumX series. This means that sensors and transducers based on 17 different sensor technologies can be connected to each of the 8 (MX840B) or 4 (MX440B) channels available on these amplifiers (see complete survey below). Owing to the innovative “Plug & Measure” technology, the QuantumX module automatically identifies your transducer and is immediately ready to start measuring.

The universal measuring amplifiers of the QuantumX family thus substantially minimize the setup time in the test stand and are the ideal choice for frequently changing measuring tasks. As always with the QuantumX, the universal measuring amplifiers can be employed as stand-alone instruments or combined with other modules; this can be achieved in various topologies (centralized, distributed, hybrid) as well as by connecting them to a PC (e.g. with HBM catman software) or a data recorder (e.g. for mobile measurements). The resulting flexibility and scalability are definitely unique in the market.

The universal modules provide a 24-bit analog-to-digital converter, sample rates of 40 kS/s per channel, and active low-pass filters and are renowned for their high precision.

The combination of precision, flexibility, and measurement setup at lightning speed makes each QuantumX universal measuring amplifier an “all-purpose tool” for demanding and highly efficient data acquisition in measurement, which has already been used in tens of thousands of applications. Typical applications include test stands, service tasks, mobile data acquisition, and monitoring.

Accuracy class: up to 0.05%
Sample rate per channel: up to 40 kS/s

Time-saving and efficient

Connection of 17 different transducer technologies per channel
Plug & Measure: Automatic sensor identification and channel configuration
Fast calibration of transducers or validation through internal shunt connection
Custom configuration of individual channels
Wide ambient temperature range (-20 °C to +65 °C) and robust design allow use in any location
Distributed system and short, pre-wired sense leads

Minimized setup time in the test stand and an ideal fit for frequently changing measurement tasks, due to immediate sensor identification and universal connectors.

Precise and reliable

24-bit analog-to-digital converter per channel
Individual sample rates of up to 40 kS/s
Active low-pass filter
Accuracy classes ranging from 0.05 to 0.1 (depending on the sensor technology)
Working standard calibration certificate according to ISO 10012 stored in the module
DAkkS certificate (ISO 17025) from HBM on request

Reliable results and proven high quality from HBM ensure successful tests at any time!

Compact, mobile, and scalable

The modules can be used as stand-alone instruments or combined with other measuring modules
Many measuring modules for special tasks are available (e.g. high-precision, torque, full bridges, etc.)
Different topologies (centralized, distributed, hybrid)
Real-time integration with the Ethernet fieldbus (CX27B), CAN (MX471B), or voltage output (MX878B)
Open software concept (Visual Studio .NET, LabVIEW, etc.)

From one to thousands of channels: Measuring equipment that is scalable to fit your requirements and integrates with your system.

MX440B - Datenblatt	Data Sheets	English
MX440B - Datenblatt	Data Sheets	German
MX440B - Datenblatt	Data Sheets	Chinese
MX440B - Datenblatt	Data Sheets	Japanese

Sales documents

QuantumX - Broschüre	Broschüre	English
QuantumX - Broschüre	Broschüre	German
QuantumX - Broschüre	Broschüre	Portuguese
QuantumX - Broschüre	Broschüre	Chinese
QuantumX - Broschüre	Broschüre	Japanese

Certificates and Approvals

QuantumX - Konformitätserklärung

Declaration of Conformity

English

MX440B - CAD Download (Step Datei)

CAD Step Files

Key attributes: DAQ Systems
Anzahl der Eingänge	4
Eingang	Strain gauge full/half bridge, Electrical voltage, Standardized current (4-20mA), Inductive bridge, LVDT, SSI, IEPE / CCLD, Piezo resistive bridge, Thermocouples, RTD (Pt, Ni), Resistance (PTC, NTC, KTY), Digital encoder, Timer digital input
Ausgang	None
Interface	TCP/IP, Firewire
Genauigkeitsklasse	0.05, 0.1
Schutzart	IP20
Messrate	40000 Hz
Gehäuse	Standalone
Echtzeitfähigkeiten	None

Product Code	Beschreibung
1-TEDS-PAK	TEDS-Packung, 5x 1-wire EEPROM, DS24B33+
1-BPX001	QuantumX Modulträger Wandmontage
1-BPX002	QuantumX Modulträger Rackmontage
1-BPX003	QuantumX Modulträger (5)
1-CASECLIP	QuantumX Verbindungselemente-Set
1-CASEFIT	QuantumX Montageblech
1-CON-P1025	Stecker D-Sub-15-HD mit Gehäuse
1-KAB239-2	Cat6A Ethernet Kabel (RJ45-2m-RJ45)
1-KAB271-3	Spannungsversorgung Kabel (ODU-3m-offen)
1-KAB272-2	Cable FireWire modul coupling, ODU, 2 m
1-KAB272-5	FireWire (ODU-5m-ODU)
1-KAB272-W-0.2	FireWire (ODU 90°-0.2m-ODU 90°)
1-NTX001	Adapter Spannungsversorgung, 24 V/DC
1-SCM-HV	Adapter 300V (SubHD15-SafetyBanana)
1-SCM-SG120	¼-Brückenergänzung (SubHD15)
1-SCM-SG350	¼-Brückenergänzung (SubHD15)
1-SCM-TCJ	Adapter SubHD15 Thermo Mini Typ J
1-SCM-TCK	Adapter SubHD15 Thermo Mini Typ K
1-SUBHD15-BNC	Adapter (SubHD15-BNC)
1-SUBHD15-MALE	Set: Sub-HD-15 Stecker mit TEDS(1-wire)
1-SUBHD15-SAVE	Buchsenschoner (SubHD15 SAVE)
1-THERMO-MXBOARD	Adapter Thermoelement (SubHD15)