MX430B

QuantumX DMS-Brücken-Messverstärker (4)

4-Kanal-Messmodul der QuantumX-Familie für die
präzise Messung beim Anschluss von
DMS-Vollbrücken-basierten Aufnehmern;
Unterstützung der folgenden Aufnehmertechnologien:
- DMS-Vollbrücke;
Für jeden Messkanal gilt:
- Genauigkeit: 100 ppm;
- Brückenspeisung: 2,5 oder 5 V mit DC-
oder TF-basierter Brückenspeisung oder DC 10 V;
- Messbereiche: 2,5 oder 5 mV/V;
- Aufnehmerimpedanz: bis max. 5000 Ohm;
- Brückenspeisung: 600 Hz Trägerfrequenz (TF) für
Störunterdrückung (max. 200 Hz Bandbreite);
- Alternative Brückenspeisung: Gleichspannung (DC)
und damit hohe Dynamik (Bandbreite: 6 kHz);
- Unterstützung 6-Leiterschaltung;
- Messrate: max. 40 kS/s;
- Galvanisch getrennte Kanäle, zur Speisung und zur
Kommunikation;
- TEDS-Unterstützung: automatische Sensorerkennung;
- Skalierungen: 2-Punkt / Gain+Offset, Tabelle,
Polynomial, Multi-Polynomial;
- Digitales Tiefpass-Filter: Bessel,
Butterworth, Lineare Phase;
- Im Gerät abgelegter Werkskalibrierschein;
Spezialfunktionen:
- Echtzeit-Berechnung 4x4 Matrix, z.B. für den
Einsatz mit Mehrkomponentenaufnehmern;
- Analogausgang pro Kanal (BNC): 10 V, skalierbar,
Filter;
Allgemeines:
- Buchse: SubHD-15;
- 1 x Ethernet (PTP);
- 2 x FireWire;
- Spannungsversorgung: DC 10...30 V, max. 8 W;
- Werkskalibrierdaten nach DIN/ISO 10012 auf dem
Gerät gespeichert (Zertifikat generieren via MX
Assistent)
- Adapter für SubD (KAB416) oder MS-Stecker (KAB144)
verfügbar.

expand_more

chevron_left

Überblick
Dokumente
Downloads
Specifications
Accessories

chevron_right

QuantumX MX430B: Precision and Maximum Interference Suppression

MX430B is the precise and compact module of the QuantumX family. It provides four inputs for accurate measurement of strain gauge full bridge based sensors such as uni- or multiaxial force sensors, torque transducers as well as pressure sensors. HBM provides the entire measurement chain for efficient measurement: precise sensors, the QuantumX MX430B measurement module and suitable software.

Precise force and torque measurement is essential, in particular when the objective is to determine the exact balance in aerodynamic tests of vehicles, aircraft or sports equipment in the wind tunnel. MX430B is also well suited for other test bench applications demanding high precision and reliability such as the determination of the center of gravity of rockets, measurement analysis of fuselage or load analysis in engine test benches. The module is lightweight and compact and thus allows for portable use for servicing in machine and sensor calibration.

Precision

4 strain gauge full bridge inputs offer a minimum accuracy of 100 ppm
Precision with repetitive and long-term measurements
Withstands interferences such as electromagnetic radiation or temperature thanks to carrier frequency analysis
Working standard calibration certificate according to ISO 10012 stored in the module
DAkkS certificate (ISO 17025) from HBM on request

Particularly well suited for test bench applicationsdemanding high precision and reliability such as aerodynamic analyses in the wind tunnel

Flexibility

Precise validation of quantities such as force, torque and pressure
For static and dynamic measurements
Distributable, therefore requiring minimal wiring effort
Flexible parameterization, through use of every channel in either AC or DC mode

Enhanced long-term stability through patented background calibration

Easy Integration

Allows for portable use for servicing in machine and sensor calibration
TEDS support enables sensors to be quickly and reliably replaced
Real-time integration thanks to directly scalable voltage outputs (+/- 10 V) with optional filter, EtherCAT (CX27B), CAN (MX471B)
Reliable catman software support

Efficient and dynamic system analysis with full bandwidth

MX430B - Datenblatt	Data Sheets	English
MX430B - Datenblatt	Data Sheets	German
MX430B - Datenblatt	Data Sheets	Chinese

Sales documents

QuantumX - Broschüre	Broschüre	English
QuantumX - Broschüre	Broschüre	German
QuantumX - Broschüre	Broschüre	Portuguese
QuantumX - Broschüre	Broschüre	Chinese
QuantumX - Broschüre	Broschüre	Japanese

Certificates and Approvals

QuantumX - Konformitätserklärung

Declaration of Conformity

English

MX430B - CAD Download (Step Datei)

CAD Step Files

Key attributes: DAQ Systems
Anzahl der Eingänge	4
Eingang	Strain gauge full/half bridge
Ausgang	Voltage (+/- 10V)
Interface	TCP/IP, Firewire
Genauigkeitsklasse	0.01
Schutzart	IP20
Messrate	40000 Hz
Gehäuse	Standalone
Echtzeitfähigkeiten	None

Product Code	Beschreibung
1-TEDS-PAK	TEDS-Packung, 5x 1-wire EEPROM, DS24B33+
1-BPX001	QuantumX Modulträger Wandmontage
1-BPX002	QuantumX Modulträger Rackmontage
1-BPX003	QuantumX Modulträger (5)
1-CASECLIP	QuantumX Verbindungselemente-Set
1-CASEFIT	QuantumX Montageblech
1-CON-P1025	Stecker D-Sub-15-HD mit Gehäuse
1-KAB144	Adapterkabel (SubHD15-MS)
1-KAB239-2	Cat6A Ethernet Kabel (RJ45-2m-RJ45)
1-KAB271-3	Spannungsversorgung Kabel (ODU-3m-offen)
1-KAB272-2	Cable FireWire modul coupling, ODU, 2 m
1-KAB272-5	FireWire (ODU-5m-ODU)
1-KAB272-W-0.2	FireWire (ODU 90°-0.2m-ODU 90°)
1-NTX001	Adapter Spannungsversorgung, 24 V/DC
1-SCM-SG120	¼-Brückenergänzung (SubHD15)
1-SCM-SG350	¼-Brückenergänzung (SubHD15)
1-SUBHD15-MALE	Set: Sub-HD-15 Stecker mit TEDS(1-wire)
1-SUBHD15-SAVE	Buchsenschoner (SubHD15 SAVE)
1-KAB416	Adapter (SubHD15-SubD15)