MX1616-PAKEASY

PAKET QUANTUMX MIT EASY

Produktpaket, bestehend aus:
QuantumX 16-Kanal DMS Brücken-Messverstärker MX1616B;
- DMS in ¼, ½, und Voll-Brückenschaltung,
Brückenspeisung: DC oder TF (1200 Hz),
integrierte 350 und 1000 Ohm Ergänzungswiderstände
für ¼-Brücken, interner Shunt-Widerstand (100 kOhm);
- el. Spannung (+/- 10 V);
- PT100, Widerstand;
- Potentiometer;
- Messrate: max. 20 kS/sec;
- Automatische Aufnehmeridentifikation: TEDS
Allgemeines:
- 1 x Ethernet (PTP), 2 x Firewire;
- Spannungsversorgung: 10...30 V DC, max. 12 W;
- Werkskalibrierdaten nach DIN/ISO 10012 auf dem
Gerät gespeichert (Zertifikat generieren via
MX Assistent)
Produktpaket ist 10% rabattiert und beinhaltet zusätzlich:
- Netzteil (1-NTX001);
- 16 x Phoenix Push-In-Steckverbinder,
Gold (1-CON-S1015);
- Ethernet Cross-over-Kabel (1-KAB239-2);
- HBM Software catman®Easy, inklusive Softwarewartung
für die ersten 12 Monate.

expand_more

chevron_left

Überblick
Dokumente
Downloads
Specifications
Accessories

chevron_right

Strain gauge amplifier – QuantumX MX1616B

The strain gauge amplifier, QuantumX MX1616B, are suitable for precise and safe data acquisition of strain gauges in full-bridge, half-bridge and quarter-bridge configuration, as well as for strain gauge based transducers, potentiometers, resistance thermometers (PT100) or normalized voltage (+/- 10V). This means that this data acquisition unit is an ideal choice whenever strains, forces and displacements are acquired and also temperature influences play a role, too.

The MX1616B module is equipped with 16 sensor inputs, arranged in a very compact housing. As a result, the MX1616B offers an unrivaled channel density in a small space. Typical application areas include static stress tests for FEM models, quasi-dynamic fatigue tests for life analysis, monitoring tasks, material investigations, residual stress analysis, maintenance tasks (e.g. for mechanical testing of PCB circuit boards), as well as for general recording of the load data in the field.

Like all QuantumX data acquisition modules, the MX1616B module offers instant sensor detection via TEDS ("Plug & Measure"), and can be combined and scaled freely with all other QuantumX modules.

catman®Easy

catmanEasy is the basic version of the catman Data Acquisition Software which includes online and offline setup, online visualizations, and online maths as well as recording functionalities. catman Easy can be combined with two different add-on modules:

EasyMath: Mathematics module and auto sequences for catman Easy.
EasyScript: Free programming under VBA in measurement and analysis mode.

Precise

Patented circuitry (4-, 5-, 6-conductor technology, carrier frequency technology, as well as cyclic auto-adjustment on all channels)
Robust mechanism, which prevents electromagnetic and thermal interferences in the measurement result (e.g. due to inverter, high currents, electrical machines or temperature influences)
Individually configurable measuring rates up to 20 kS/s per channel and with high signal bandwidth.
Working standard calibration certificate according to ISO 10012 stored in the module
DAkkS certificate (ISO 17025) from HBM on request

Accurate, interference-free measurement results - for dynamic as well as static measurements. Thanks to the carrier-frequency method, you can count on clear results even when very high interferences occur and long cables are used.

Time-saving and efficient

Plug & Measure - the automatic channel configuration for each sensor
Instant calibration of sensors or plausibility check by internal shunt connection
Fast instrumentation using push-in plugs
Distributed concept and short, prefabricated sensor cables

Realize time and efficiency gains in measurement and analysis: through intelligently combined measurement chains and plug & measure technology. Mechanical voltages can be immediately visualized, stored or digitally forwarded.

Easy to integrate

Suitable for a wide range of ambient temperatures (-20 ° C ... + 65 ° C) with a robust design
Instant results with the help of the HBM catman software for data recording and data analysis
Real-time integration on the Ethernet fieldbus (CX27C), CAN (MX471C), or voltage output (MX878B)
Open software concept (Visual Studio .NET, LabVIEW, etc.)

A strain gauge amplifier that fits into your system landscape. That's how easy it is!

QuantumX MX1616B,QuantumX MX1615...,QuantumX MX1615B - Datenblatt	Data Sheets	English
catman - Datenblatt	Data Sheets	English
QuantumX MX1616B,QuantumX MX1615B - Datenblatt	Data Sheets	Japanese
QuantumX MX1616B,QuantumX MX1615... - Datenblatt	Data Sheets	German
QuantumX MX1616B,QuantumX MX1615...,QuantumX MX1615B - Datenblatt	Data Sheets	Chinese
catman - Datenblatt	Data Sheets	French
catman - Datenblatt	Data Sheets	German
catman - Bedienungsanleitung	Manuell	English
catman - Bedienungsanleitung	Manuell	German

Sales documents

QuantumX - Broschüre	Broschüre	English
QuantumX - Broschüre	Broschüre	German
QuantumX - Broschüre	Broschüre	Portuguese
QuantumX - Broschüre	Broschüre	Chinese

Certificates and Approvals

QuantumX - Broschüre	Broschüre	English
QuantumX - Broschüre	Broschüre	German
QuantumX - Broschüre	Broschüre	Portuguese
QuantumX - Broschüre	Broschüre	Chinese
QuantumX - Broschüre	Broschüre	Japanese

MX1616B - CAD Download (Step Datei)

CAD Step Files

Key attributes: DAQ Systems
Anzahl der Eingänge	16
Eingang	Strain gauge full/half bridge, Strain gauge quarter bridge, Standardized voltage (+/- 10V), Resistance (PTC, NTC, KTY), RTD (Pt, Ni)
Ausgang	None
Interface	TCP/IP, Firewire
Genauigkeitsklasse	0.05, 0.1
Schutzart	IP20
Messrate	20000 Hz
Gehäuse	Standalone
Echtzeitfähigkeiten	None

Main Menu

Main Menu

Main Menu

Main Menu

PAKET QUANTUMX MIT EASY

Strain gauge amplifier – QuantumX MX1616B

catman®Easy

Precise

Time-saving and efficient

Easy to integrate