arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

MX1616-PAKAP

PAKET QUANTUMX MIT catmanAP

Produktpaket, bestehend aus:
QuantumX 16-Kanal DMS Brücken-Messverstärker MX1616B;
- DMS in ¼, ½, und Voll-Brückenschaltung,
Brückenspeisung: DC oder TF (1200 Hz),
integrierte 350 und 1000 Ohm Ergänzungswiderstände
für ¼-Brücken, interner Shunt-Widerstand (100 kOhm);
- el. Spannung (+/- 10 V);
- PT100, Widerstand;
- Potentiometer;
- Messrate: max. 20 kS/sec;
- Automatische Aufnehmeridentifikation: TEDS
Allgemeines:
- 1 x Ethernet (PTP), 2 x Firewire;
- Spannungsversorgung: 10...30 V DC, max. 12 W;
- Werkskalibrierdaten nach DIN/ISO 10012 auf dem
Gerät gespeichert (Zertifikat generieren via
MX Assistent)
Produktpaket ist 15% rabattiert und beinhaltet zusätzlich:
- Netzteil (1-NTX001);
- 16 x Phoenix Push-In-Steckverbinder,
Gold (1-CON-S1015);
- Ethernet Cross-over-Kabel (1-KAB239-2);
- HBM Software catman®AP, inklusive Softwarewartung
für die ersten 12 Monate.

img

PAKET QUANTUMX MIT catmanAP

expand_more
chevron_left
chevron_right

Strain gauge amplifier – QuantumX MX1616B

The strain gauge amplifier, QuantumX MX1616B, is suitable for precise and safe data acquisition of strain gauges in full-bridge, half-bridge and quarter-bridge configuration, as well as for strain gauge based transducers, potentiometers, resistance thermometers (PT100) or normalized voltage (+/- 10V). This means that this data acquisition unit is an ideal choice whenever strains, forces and displacements are acquired and also temperature influences play a role, too. 

The MX1616B module is equipped with 16 sensor inputs, arranged in a very compact housing. As a result, the MX1616B offers an unrivaled channel density in a small space. Typical application areas include static stress tests for FEM models, quasi-dynamic fatigue tests for life analysis, monitoring tasks, material investigations, residual stress analysis, maintenance tasks (e.g. for mechanical testing of PCB circuit boards), as well as for general recording of the load data in the field.

Like all QuantumX data acquisition modules, the MX1616B module offers instant sensor detection via TEDS ("Plug & Measure"), and can be combined and scaled freely with all other QuantumX modules.

 

catman®AP

catmanAP includes the full catmanEasy software package which includes online and offline setup, online visualizations, and online maths as well as recording functionalities and can be combined with two different add-on modules:

  • EasyMath: Mathematics module and auto sequences for catmanEasy.
  • EasyScript: Free programming under VBA in measurement and analysis mode.

 and adds to it powerful modules such as:

  • GNSS/GPS data visualization on maps
  • Video Recording
  • Wheelforce transducer integration
  • Parallel Recording
  • Cloud data streaming

Precise

  • Patented circuitry (4-, 5-, 6-conductor technology, carrier frequency technology, as well as cyclic auto-adjustment on all channels)
  • Robust mechanism, which prevents electromagnetic and thermal interferences in the measurement result (e.g. due to inverter, high currents, electrical machines or temperature influences)
  • Individually configurable measuring rates up to 20 kS/s per channel and with high signal bandwidth.
  • Working standard calibration certificate according to ISO 10012 stored in the module
  • DAkkS certificate (ISO 17025) from HBM on request

Accurate, interference-free measurement results - for dynamic as well as static measurements. Thanks to the carrier-frequency method, you can count on clear results even when very high interferences occur and long cables are used.

Time-saving and efficient

  • Plug & Measure - the automatic channel configuration for each sensor
  • Instant calibration of sensors or plausibility check by internal shunt connection
  • Fast instrumentation using push-in plugs
  • Distributed concept and short, prefabricated sensor cables

Realize time and efficiency gains in measurement and analysis: through intelligently combined measurement chains and plug & measure technology. Mechanical voltages can be immediately visualized, stored or digitally forwarded.

Easy to integrate

  • Suitable for a wide range of ambient temperatures (-20 ° C ... + 65 ° C) with a robust design
  • Instant results with the help of the HBM catman software for data recording and data analysis
  • Real-time integration on the Ethernet fieldbus (CX27C), CAN (MX471C), or voltage output (MX878B)
  • Open software concept (Visual Studio .NET, LabVIEW, etc.)

A strain gauge amplifier that fits into your system landscape. That's how easy it is!

Sprache keyboard_arrow_down
QuantumX MX1616B,QuantumX MX1615...,QuantumX MX1615B - Datenblatt Data Sheets English
catman - Datenblatt Data Sheets English
QuantumX MX1616B,QuantumX MX1615B - Datenblatt Data Sheets Japanese
QuantumX MX1616B,QuantumX MX1615... - Datenblatt Data Sheets German
QuantumX MX1616B,QuantumX MX1615...,QuantumX MX1615B - Datenblatt Data Sheets Chinese
catman - Datenblatt Data Sheets French
catman - Datenblatt Data Sheets German
catman - Bedienungsanleitung Manuell English
catman - Bedienungsanleitung Manuell German

Sales documents

QuantumX - Broschüre Broschüre English
QuantumX - Broschüre Broschüre German
QuantumX - Broschüre Broschüre Portuguese
QuantumX - Broschüre Broschüre Chinese
QuantumX - Broschüre Broschüre Japanese

Certificates and Approvals

QuantumX - Konformitätserklärung Declaration of Conformity English
Key attributes: DAQ Systems
Anzahl der Eingänge 16
Eingang Strain gauge full/half bridge, Strain gauge quarter bridge, Standardized voltage (+/- 10V), Resistance (PTC, NTC, KTY), RTD (Pt, Ni)
Ausgang None
Interface TCP/IP, Firewire
Genauigkeitsklasse 0.05, 0.1
Schutzart IP20
Messrate 20000 Hz
Gehäuse Standalone
Echtzeitfähigkeiten None